WF200

802.11g Wireless Router

46

allowed

Protocol:

Select the protocol to filter. Choices are TCP, UDP, and ICMP.

Rule Unmatched:

Choices are

Forward

and

Next.

Select what happens to the data in question if the

rule you are currently editing is unmatched. Next means that the data is then compared to the next IP

filter rule. Forward means that the data will be allowed into your system. Note that a Forward rule

should be the last rule, as no data will be compared to rules after a Forward rule.

IP/MAC Filter Set Index:

Select the IP/MAC filter set you wish to view.

For Example

Please follow below steps to set your IP Filter:

1.

IP/MAC Filter Set Editing

:

Choose your

IP/MAC Filter Set Index

, Interface and Direction

options.

Remember, Interface and Direction functions are affected with IP/MAC Filter Set Index

.

EX: if your 1

st

index set of IP filter set PVC0 as Interface and Outgoing as Direction, so the list of

1

st

IP Filter will be PVC0 and Outgoing as their settings.

2.

IP/MAC Filter Rule Editing:

Select the

IP/MAC Filter Rule Index

(up to 6 numbers for each

set index) and choose

Active

option.

As below example,

Source IP Address

is 192.168.1.4,

Subnet Mask

is 255.255.255.255,

Destination IP Address

&

Subnet Mask

is 0.0.0.0,

Port

Number

is 80, and,

Protocol

sets TCP. From this setting, it filters 192.168.1.4, so it cannot access

the web.

Notice

, each IP Filter Set Index can have up to 6 filters IP. At “

Rule Unmatched

” option,

you must choose

NEXT

until the last filter IP choose

Forward

.

3.

After every setting is done, click

SAVE

to continue next IP Filter Editing.

WF200

802.11g Wireless Router

47

7.3 SNMP

The

Simple Network Management Protocol (SNMP)

is used for exchanging information between

network devices. It enables a host computer to access configuration, performance, and other system

data that resides in a database on the modem. The host computer is called a

management station

and

the modem is called an

SNMP agent

. The data that can be accessed via SNMP is stored in a

Management Information Database

(MIB) on the modem.

Get Community:

Select to set the password for incoming Get- and GetNext request from management

station.

Set Community:

Select to set the password for incoming Set request from management station.

The default password is ‘

public

’. When you are done making changes, click on

SAVE

to save your

changes.

7.4UPnP

UPnP (Universal Plug and Play)

is a distributed, open networking standard that uses TCP/IP for

simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join a

network, obtain an IP address, convey its capabilities and learn about other devices on the network. In

turn, a device can leave a network smoothly and automatically when it is no longer in use. UPnP

broadcasts are only allowed on the LAN.

How do I know if I'm using UPnP?

UPnP hardware is identified as an icon in the Network Connections folder (in Windows XP &

Windows ME). Each UPnP-compatible device that is installed on your network will appear as a

separate icon.

UPnP (Universal Plug and Play):

You can choose

“Activated”

or

“Deactivated”

option from this

session.

Auto-Configured (by UPnP Application):

UPnP network devices can automatically configure

network addressing, announce their presence in the network to other UPnP devices and enable

exchange of simple product and service descriptions. Choose

“Activated”

option to allow UPnP-

enabled applications to automatically configure the ADSL Router so that they can communicate

through the ADSL Router, for example by using NAT traversal, UPnP applications automatically

reserve a NAT forwarding port in order to communicate with another UPnP enabled device; this

WF200

802.11g Wireless Router

48

eliminates the need to manually configure port forwarding for the UPP enabled application.

If you

don’t want to make configuration changes through UPnP, just choose

“Deactivated”

.

SAVE

: Click

SAVE

to save the setting to the ADSL Router.

7.5DDNS

The

Dynamic Domain Name System

allows you to update your current dynamic IP address with one

or many dynamic DNS services so that anyone can contact you (in NetMeeting, CU-SeeMe, etc.). You

can also access your FTP server or Web site on your own computer using a DNS-like address (for

instance myhost.dns.org, where my host is a name of your choice) that will never change instead of

using an IP address that changes each time you reconnect. Your friends or relatives will always be able

to call you even if they don't know your IP address. First of all, you need to have registered a dynamic

DNS account with www.dyndns.org. This is for people with a dynamic IP from their ISP or DHCP

server that would still like to have a DNS name. The Dynamic DNS service provider will give you a

password or key.

Dynamic DNS

: Choose the option for

Activated

or

Deactivated

DDNS.

Service Provider:

The default Dynamic DNS service provider is

www.dyndns.org

.

My Host Name:

Type the domain name assigned to your ADSL by your Dynamic DNS provider.

E-mail Address

: Type your e-mail address.

Username:

Type your user name.

Password:

Type the password assigned to you.

Wildcard support:

Select

Yes

or

No

to turn on DYNDNS Wildcard.

DYNDNS Wildcard

--> Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be

aliased to the same IP address as yourhost.dyndns.org. This feature is useful if you want to be able to

use, for example, www.yourhost.dyndns.org and still reach your hostname.

SAVE:

Click

SAVE

to save your changes.

Note that you must enter the user name exactly as your ISP assigned it. If the assigned name is in the

form of

user@domain

where domain identifies a service name, enter it exactly as given. When you are

done making changes, click on SAVE to save your changes.

7.6CWMP

TR-069

is a

CPE WAN Management Protocol

(

CWMP

). As a bidirectional SOAP/HTTP based

protocol it provides the communication between

CPE

and

Auto Configuration Servers

(

ACS

). It

includes both a safe auto configuration and the control of other CPE management functions within an

integrated framework. In the course of the boom of the broadband market, the number of different

Internet access possibilities grew as well (e.g. modems, routers, gateways, Set-top box, paddles, VoIP-

phones). At the same time the configuration of this equipment became more complicated -- too

complicated for the end-users. For this reason the TR-069 standard was developed. It provides the

possibility of auto configuration of these access types. The technical specifications are managed and

published by the DSL Forum. Using TR-069 the terminals can get in contact with the

Auto

WF200

802.11g Wireless Router

49

Configuration Servers (ACS)

and establish the configuration automatically. Accordingly other service

functions can be provided. TR-069 is the current standard for activation of terminals in the range of

DSL broadband market.

WF200

802.11g Wireless Router

50

8. Maintenance

8.1 Administration

There is only one account that can access Web-Management interface-

Administration

. Admin has

read/write access privilege. In this web page, you can set new password for admin.

New Password:

Type the new password in this field.

Confirm Password:

Type the new password again in this field.

Note:

If you ever forget the password to log in, you may press the RESET button up to 6 second to

restore the factory default settings. The Factory Default Settings for User Name & Password are

admin

&

admin

.

8.2

Time Zone

The system time is the time used by the device for scheduling services. You can manually set the time

or connect to a NTP (Network Time Protocol) server. If an NTP server is set, you will only need to set

the time zone. If you manually set the time, you may also set Daylight Saving dates and the system

time will automatically adjust on those dates.

Current Date/Time:

This field displays an updated Date and Time when you reenter this menu.

[Time Synchronization]

Synchronize time with:

You can choose

“NTP Server automatically”, “PC’s Clock”, or “Manually”

to coordinate the time.

Time Zone:

Choose the Time Zone of your location. This will set the time difference between your