CRADLEPOINT

MBR1200| USER MANUAL Firmware ver. 1.6.12

© 2010

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 79

6.3.4

Modem Specific Settings

This section allows customization of the AT dial commands

Modem Interface.

Use the drop down menu to specify which modem

interface you want to adjust settings for (i.e.,

USB1

,

USB2

,

USB3

,

Cardbus

,

ExpressCard

).

AT Dial Script.

Enter the AT commands to be used in establishing a

network connection. Each command must be entered on a separate

line. All command responses must include

OK

, except the final

command response, which must include

CONNECT

.

Example:

AT

AT+CGDCONT=2,”IP”,”isp.cingular”

ATDT*99***2#

Modem Password.

Enter the modem password, if required

Verify Modem Password.

Enter the modem password again to ensure it was entered correctly.

Disable Automatic Dialing.

If you check this box then a modem won't dial unless you start it manually. Otherwise a modem will dial automatically

(if it is the highest priority available device).

Make SIM PIN Permanent.

If

Make SIM PIN Permanent

is selected the entered PIN will be remembered between reboots. If a modem is plugged

in when this is selected the router will make a permanent association between the PIN and the current modem. When a PIN is associated with a

modem the PIN will be automatically entered for you when the associated modem is plugged in. If you choose Permanent PIN but there is no

modem plugged in at the time then no modem is associated with any PIN. The next time a modem is plugged in and a valid PIN is entered for the

modem the router will remember that association.

SIM PIN.

Enter your

PIN number

here. If Permanent PIN is not selected, this PIN number will be used with any modem plugged in until the router

is rebooted.

Access Point Name (APN).

Some wireless carriers provide multiple Access Point Names that a modem can connect to. If you wish to specify an

APN, enter it into this field. Some examples of APN are

isp.cingular

,

ecp.tmobile.com

and

vpn.com

. This APN will be set in the first profile

position (see

Modem Diagnostics

). The modem must be removed and reinserted for this change to take affect (or the router rebooted). This APN

is associated with the modem in the interface referred to in the

Modem Interface

drop down menu, so multiple APNs may be entered.

(continued)

CRADLEPOINT

MBR1200| USER MANUAL Firmware ver. 1.6.12

© 2010

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 80

Band Select.

This function is currently supported only on Sierra Wireless

modems. It allows you to select specific frequency bands to use, either

GSM (2.5G network) or WCDMA (3G network) settings, or the use of

"Autoband", which is automatic band selection. Depending on your

location, different network selections will be shown based on the bands

the particular modem supports and the router recognizes. If you select

one of the WCDMA settings such as "WCDMA/GSM NA (North

America)", the modem will use the 3G network in preference to the 2.5G

network.

This change is persistent and stays with the modem, even if you

unplug it and move it to a PC.

The band currently selected by the modem

will be marked with an asterisk (*) in the drop-down list.

WiMAX Realm Select.

If you are using a 4G modem you must select the

WiMAX realm.

This allows you to connect to your carrier: ie. Sprint.

CRADLEPOINT

MBR1200| USER MANUAL Firmware ver. 1.6.12

© 2010

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 81

6.4 Update

Some modems can be activated and updated while

plugged into the router. Activation and updates vary by

modem model and service provider. All supported

methods are displayed. If no methods are displayed for

your device you will need to activate and update your

device externally.

CRADLEPOINT

MBR1200 | USER MANUAL Firmware ver. 1.6.12

© 2010

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 82

7 TOOLS TAB

The Advanced tab provides access to 13 sub-menus for

administering advanced functions/tasks important in enterprises

and larger organizations. Specifically, for IT organizations that

use a number of MBR1200 units to provide wireless data

connectivity for employees, the Tools tab allows you to enable

the remote devices to be an extension of your network, and

abide by the policies set within your department. Included are a

number of features that allow the unit to provide security,

supportability, and EVDO handset behavior regardless where a

remote employee is located.



Admin



Dynamic DNS



Email Settings



Firmware



IPSec VPN



Managed Services



Schedules



SNMP



SysLog



System



System Check



Time



User Log

CRADLEPOINT

MBR1200 | USER MANUAL Firmware ver. 1.6.12

© 2010

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 83

7.1 Admin (Administrative Settings).

Use the Admin sub-menu to set a password for access to the Web-based

management. The default Admin and Internet Access (User) passwords are

the last six characters of the MAC address (NOTE: all letters in the MAC

address should be entered as lower case). This screen may also be used by

the individual who first activates the unit.

7.1.1

System Language

System Language.

Select

English

or

Spanish

.

7.1.2

Admin Password

Password.

Type password in this field that you want to use to grant access

to Web based management interface. Default: Last 6 characters of the

MBR12

00‟s MAC address.

NOTE: all letters in the MAC address should be entered as lower case.

Verify Password.

Re-type the password to ensure it was entered correctly.

7.1.3

System Name

Gateway Name.

The name of the router can be changed here. Default

(CradlePoint: MBR1200).

When you are done editing the settings, you must click the

Save Settings

button at the top of the page to make the changes effective and permanent.

(continued)