Updated: 22nd April 2021
To login into any model of cradlepoint (be it CTR-350, CTR-500 or any other), you need router IP, username ID & router password. All this info and other, is already given in Cradlepoint router manuals but if you have lost your manual or you don't have time to go through it and need a quick fix then follow below.
To access the Cradlepoint router admin console of your device, just follow this article. You can find correct Cradlepoint login IP, Router Username & Password, below.
There are 5 Cradlepoint Router Models. See below, to find all likely IPs against your particular model number!
|Router Model||Possible Login IP Address|
From the methods given above, if you have found the right IP, then put it into the browser to access admin panel. A screen will appear like below. It's asking for login credentials.
Time and again people from all around the world have off and on told us about login credentials which most likely work for them. With patience, try that applies to your Cradlepoint model.
Try these most popular username & password combinations, Cradlepoint factory tends to use, by default.
Just look closely at your Cradlepoint router for sticker like this:
These are default credentials for your device. Try them, it will work (if you didn't changed them in past)
An ultimate trick in this scenario is to reset your router. Just look for a small button like below (hidden inside). Press it with a needle or match-stick for 10 seconds and restart your device & go back to Method No. 2 (above). And you will be all set!
Luckily, we have compiled list of router setup and configuration manual/manuals for Cradlepoint routers. Currently, 5 manuals are displayed below.
These companies are competitor of Cradlepoint & also provide great products.
Press Ctrl + D to add this site to your favorites!