Page 61 / 75
Scroll up to view Page 56 - 60
Conceptronic C300BRS4
User Manual
61
TOOLS - SYSTEM
Once you have configured the Router to your satisfaction, it is a good idea to back up the
configuration file to your computer. To save the current configuration settings to your computer,
click the
System
button in the
Tools
directory to display the
System Settings
window. Click the
Save
button to Save Settings to Local Hard Drive. You will be prompted to select a location on your
computer to put the file.
To load a previously saved configuration file, click the
Browse
button and locate the file on your
computer. Click the
Restore
button to
Load Settings from Local Hard Drive
. Confirm that you want
to load the file when prompted and the process is completed automatically. The Router will reboot
and begin operating with the configuration settings that have just been loaded.
To reset the Router to its factory default settings, click the
Reset
button. You will be prompted to
confirm your decision to reset the Router. The Router will reboot with the factory default settings
including IP settings (192.168.0.1) and Administrator password (admin).
To simply restart the Router, click the
Reboot
button.
System Settings window
Page 62 / 75
Conceptronic C300BRS4
User Manual
62
TOOLS - FIRMWARE
Use this window to load the latest firmware for the device. Note that the device configuration
settings may return to the factory default settings, so make sure you save the configuration settings
with the
System Settings
window described above.
Firmware Upgrade window
To upgrade firmware to the router, type in the name and path of the file, or click on the
Browse
button to search for the file. Click the
Apply
button to begin copying the file. The file will load and
restart the Router automatically.
Performing a Firmware Upgrade can sometimes change the configuration settings. Be sure to back-
up the Router’s configuration settings before upgrading the firmware.
Page 63 / 75
Conceptronic C300BRS4
User Manual
63
TOOLS - MISC
To perform a standard Ping test for network connectivity as well as a number of miscellaneous
network tasks, click the
Misc.
button in the
Tools
menu to view the
Miscellaneous Configuration
window.
Ping Test window
Ping Test
The Ping test functions on the WAN and LAN interfaces. Type the
Host Name or IP Address
you
want to check in the space provided and click the
Ping
button. Read the Ping test result in the
space immediately below
Block WAN Ping
The Block WAN Ping feature allows the user to block hackers who may be trying to test whether
your WAN IP address is valid.
SPI mode
Stateful Packet Inspection mode is an active firewall the user can enable to keep track of the state
of network connections.
Page 64 / 75
Conceptronic C300BRS4
User Manual
64
UPnP Settings
UPnP supports zero-configuration networking and automatic discovery for many types of networked
devices. When enabled, it allows other devices that support UPnP to dynamically join a network,
obtain an IP address, convey its capabilities, and learn about the presence and capabilities of other
devices. DHCP and DNS service can also be used if available on the network. UPnP also allows
supported devices to leave a network automatically without adverse effects to the device or other
devices on the network. UPnP is a protocol supported by diverse networking media including
Ethernet, Firewire, phone line, and power line networking.
VPN Pass-Through
This feature allows VPN connections to pass through the Router. It is enabled by default.
Page 65 / 75
Conceptronic C300BRS4
User Manual
65
Menu “Status”
Use this window to quickly view basic current information about the LAN, WAN, and wireless
interfaces and device information including Firmware Version and MAC address.
STATUS - LOG
The system log displays chronological event log data. Use the navigation buttons to view or scroll
log pages.
View Log window
You may also save a log by sending it to an admin e-mail address.
Complete the information on this window and then click the
Apply
button.
19216811.live