Page 101 / 130
Scroll up to view Page 96 - 100
100
If router mode is PPPoE the following screen will be displayed (for your reference).
Page 102 / 130
101
Chapter 9
Management
The Management section includes the following functions and processes.
9.1 Settings
9.5 Internet Time
9.2 System Log
9.6 Access Control
9.3 SNMP Agent
9.7 Update Software
9.4 TR-069 Client
9.8 Save and Reboot
9.1 Settings
The Settings submenu allows for backup of settings, retrieval of settings and
restoring to factory default settings.
9.1.1
Backup
The Backup option under Management
Æ
Settings saves your router configurations
to a file on your PC.
Click Backup Settings in the main menu. You will be prompted
to define the location of the backup file to save.
After choosing the file location,
click
Backup Settings.
The file will then be saved to the assigned location.
Page 103 / 130
102
9.1.2
Update Settings
The Update option under Management
Æ
Settings updates your router settings
using your saved files.
Page 104 / 130
103
9.1.3
Restore Default
Click the
Restore Default Settings
button to restore the device to its original
factory installed settings (see section
3.3 Default Settings
).
NOTE 1:
This entry has the same effect as the hardware reset-to-default button.
The device board hardware and the boot loader support the
reset to
default
button.
If the reset button is continuously pushed for more than
5 seconds, the boot loader will erase the entire configuration data saved
on the flash memory.
NOTE 2:
Restoring system settings requires a system reboot.
This necessitates
that the current Web UI session be closed and restarted.
Before
restarting the connected PC must be configured with a static IP address in
the 192.168.1.x subnet in order to configure the device.
Page 105 / 130
104
After the Restore Default Configuration button is selected, the following screen
appears. Close the window and wait for 2 minutes before reopening your web
browser. If necessary, reconfigure your PC IP address to match your new
configuration (see section
3.1 TCP/IP Settings
for instructions)
9.2 System Log
The System Log option under Management
Æ
Settings allows you to view the
system events log, or to configure the System Log options.
The default setting of
system log is disabled.
Follow the steps below to enable and view the system log.
STEP 1:
Click
Configure System Log
to display the following screen.
19216811.live