Page 71 / 130
Scroll up to view Page 66 - 70
70
6.6 Routing
6.6.1
Default Gateway
If the
Enable Automatic Assigned Default Gateway
checkbox is selected, the
default gateway will be assigned based on a DHCP enabled PVC. If the checkbox is
not selected, enter the static default gateway AND/OR WAN interface.
Click
Save/Apply
to save it.
NOTE:
After enabling the
Automatic Assigned Default Gateway
, you must
reboot the router to activate it.
Page 72 / 130
71
6.6.2
Static Route
This screen lists the configured static routes and allows configuring of static routes.
Choose
Add
or
Remove
to configure the static routes.
To add static route, click the
Add
button to display the following screen.
Enter the
destination network address, subnet mask, gateway AND/OR available WAN
interface then click
Save/Apply
to add the entry to the routing table.
Page 73 / 130
72
6.6.3
RIP
To activate RIP for the device, select the
Enabled
radio button for Global RIP Mode.
To configure an individual interface, select the desired RIP version and operation,
followed by placing a check in the
Enabled
checkbox for the interface.
Click
Save/Apply
to start/stop RIP based on the Global RIP mode selected.
NOTE
:
This screenshot is based on PPPoE encapsulation.
Page 74 / 130
73
6.7 DNS
6.7.1
DNS Server
If
Enable Automatic Assigned DNS
checkbox is selected, this router will accept
the first received DNS assignment from one of the DHCP enabled PVCs during the
connection establishment. If the checkbox is not selected, enter the primary and
optional secondary DNS server IP addresses. Click the
Save
button to save the new
configuration. You must reboot the router to make the new configuration effective.
6.7.2
Dynamic DNS
The Dynamic DNS service allows you to alias a dynamic IP address to a static
hostname in any of the many domains, allowing your ADSL router to be more easily
accessed from various locations on the Internet.
Page 75 / 130
74
NOTE
:
The
Add
and
Remove
buttons will only be displayed if the CPE has
already been assigned an IP address from the remote server.
To add a dynamic DNS service, click
Add
and the following screen will be displayed:
D-DNS provider
Select a dynamic DNS provider from the list.
Hostname
Enter the name for the dynamic DNS server.
Interface
Select the interface from the list.
Username
Enter the username for the dynamic DNS server.
Password
Enter the password for the dynamic DNS server.
19216811.live