Comtrend CT-5372 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 137 Scroll up to view Page 6 - 10

2.2

Installing the USB Device Driver

Before you connect your router’s USB cable to your PC, you must load the ADSL USB

drivers. The USB driver supports Windows 98, ME, 2000, and XP.

To connect the router to a PC using the USB interface, you need to use a standard

USB cable and install the USB interface software. Follow the steps below:

STEP 1:

Connect the USB router to the PC by plugging the flat connector of a

standard USB cable into your PC, and plugging the square connector into

the router. The screen will display as below:

STEP 2:

When the screen displays as below, click the

Note

: This screen won’t be displayed if the USB Driver has been previously

un/installed.

10

Page 12 / 137

STEP 3:

When the screen displays as below,

select

Search for a suitable driver

and click the

STEP 4:

Select Specify a location and click the Next button. If you are installing the

software from a disk, insert the disk.

11

Page 13 / 137

STEP 5:

Select the location of the file using the

Browse

button. Normally, the file

is on the CD-ROM shipped with the device.

STEP 6:

Locate the file, and click the

Open

button.

12

Page 14 / 137

STEP 7:

When the screen displays as below, click the

OK

button.

STEP 8:

When the screen below displays, click the

STEP 9:

Click the

Finish

button, when the screen displays as below.

13

Page 15 / 137

STEP 10:

Installation is complete.

14

Rate

Popular Comtrend Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share