Comtrend CT-5372 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Comtrend

CT-5372

Page 76 / 137 Scroll up to view Page 71 - 75

D-DNS provider

Select a dynamic DNS provider from the list

Hostname

Enter the name for the dynamic DNS server.

Interface

Select the interface from the list

Username

Enter the username for the dynamic DNS server.

Password

Enter the password for the dynamic DNS server.

Page 77 / 137

6.8 DSL

To access the DSL settings, first click On

Advanced Setup

and then click on

DSL

The DSL Settings dialog box allows you to select an appropriate modulation mode.

Option

Description

Auto Mode

(G.dmt, G.lite or T1.413)

Sets the system auto-sense between G.Dmt, G.lite, or

T1.413

G.dmt/G.lite

Sets G.Dmt/G.lite if you want the system to use either

G.Dmt or G.lite mode.

T1.413

Sets the T1.413 if you want the system to use only

T1.413 mode.

ADSL2 Enabled

The device can support the functions of the ADSL2.

AnnexL Enabled

The device can support/enhance the long loop test.

ADSL2+ Enabled

The device can support the functions of the ADSL2+.

AnnexM

Covers a higher “upstream” data rate version, by

making use of some of the downstream channels.

Inner Pair

Reserved only

Outer Pair

Reserved only

Bitswap Enable

Allows bitswaping function

SRA Enable

Allows seamless rate adaptation

Page 78 / 137

6.9 Print Server

The CT-5372 is equipped with one high-speed USB2.0 host connection.

With software support, users can connect USB devices such as a printer and hard

disc to the CT-5372. For this software release, printer server is supported.

Please refer to Appendix

for an Example.

Page 79 / 137

6.10 Port Mapping

Port Mapping supports multiple port to PVC and bridging groups. Each group will

perform as an independent network. To support this feature, you must create

mapping groups with appropriate LAN and WAN interfaces using the Add button.

The Remove button will remove the grouping and add the ungrouped interfaces to

the Default group.

As shown below, when you tick the Enable virtual ports on, all of the LAN interfaces

will be grouped together as a default.

To add a port mapping group, simply click the Add button.

Page 80 / 137

To create a group from the list, first enter the group name and then select from the

available interfaces on the list.

Automatically Add Clients With the Following DHCP Vendor IDs:

Add support to automatically map LAN interfaces including Wireless and USB to

PVC's using DHCP vendor ID (option 60). The local DHCP server will decline and

send the requests to a remote DHCP server by mapping the appropriate LAN

interface. This will be turned on when PortMapping is enabled.

There are 4 PVCs (0/33, 0/36, 0/37, 0/38). 0/33 is for PPPoE and the others are for

IP setup-box (video).

The Lan interfaces are ETH1, ETH2, ETH3, ETH4, Wireless and USB.

Port mapping configuration are:

1. Default : ENET1, ENET2, ENET3, ENET4, Wireless, Wireless_Guest and USB.

2. Video: nas_0_36, nas_0_37 and nas_0_38. The DHCP vendor ID is "Video".

The CPE's dhcp server is running on "Default". And ISP's dhcp server is running on

PVC 0/36. It is for setup-box use only.

On the LAN side, PC can get IP address from CPE's dhcp server and access internet

via PPPoE (0/33).

Rate

Popular Comtrend Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share