Page 106 / 137
Scroll up to view Page 101 - 105
9.1.1
Configuration Backup
The Backup option under Management>Settings save your router configurations to
a file on your PC. Click BACKUP Settings in the main window. You will be prompted
to define the location of the backup file to save. After choosing the file location,
click
Backup Settings.
The file will then be saved to the assigned location.
105
Page 107 / 137
9.1.2
Tools – Update Settings
The Update option under Management>Settings update your router settings using
your saved files.
106
Page 108 / 137
9.1.3
Restore Default
Clicking the Restore Default Configuration option in the Restore Settings screen can
restore the original factory installed settings.
NOTE:
This entry has the same effect as the hardware reset-to-default button.
The CT-5372 board hardware and the boot loader support the
reset to default
button. If the reset button is continuously pushed for more than 5 seconds, the
boot loader will erase the entire configuration data saved on the flash memory.
NOTE:
Restoring system settings requires a system reboot. This necessitates that
the current Web UI session be closed and restarted. Before restarting the
connected PC must be configured with a static IP address in the 192.168.1.x subnet
in order to configure the CT-5372.
107
Page 109 / 137
Default settings
The CT-5372 default settings are
z
z
Local user name: root
z
Password: 12345
z
Remote user name: support
z
Remote user password: support
After the Restore Default Configuration button is selected, the following screen
appears. Close the DSL Router Configuration window and wait for 2 minutes before
reopening your web browser. If necessary, reconfigure your PC's IP address to
match your new configuration.
108
Page 110 / 137
9.2 System Log
The System Log option under Management>Settings allows you to view the system
events log, or to configure the System Log options. The default setting of system
log is disabled. Follow the steps below to enable and view the system log.
1. Click
Configure System Log
to display the following screen.
2. Select from the desired Log options described in the following table, and then
click
Save/Apply
.
109
19216811.live