Page 91 / 180
Scroll up to view Page 86 - 90
WRVS4400N User Guide
85
Administration Tab
Setting Up and Configuring the Router
Local Log
—Enable this if you want to see the log locally on the Wireless Router.
View Log button
—If
Local Log
is enabled, click
View Log
to view the event log on the
Wireless Router.
Change these settings as described here and click
Save Settings
to apply your changes, or click
Cancel Changes
to cancel your changes. Help information is displayed on the right-hand side
of the screen, and click
More
for additional details.
Downloaded from
www.Manualslib.com
manuals search engine
Page 92 / 180
WRVS4400N User Guide
86
Administration Tab
Setting Up and Configuring the Router
Diagnostics
Ping Test Parameters
Ping Target IP
—Enter the IP address or URL that you want to ping.
Ping Size
—Enter the size of the packet you want to use.
Number of Pings
—Enter the number of times you wish to ping the target device.
Ping Interval
—Enter the time period (in milliseconds) between each ping.
Ping Timeout
—Enter the desired time period (in milliseconds). If a response is not received
within the defined ping period, the ping is considered to have failed.
Downloaded from
www.Manualslib.com
manuals search engine
Page 93 / 180
WRVS4400N User Guide
87
Administration Tab
Setting Up and Configuring the Router
Start Test button
—Click this button to begin the test. A new screen appears and display the
test results. A summary of the PING results will be shown on the bottom of this screen.
Ping Result
. Displays the Ping status results.
Traceroute Test Parameters
TraceRoute Target
—Enter the IP address or Host name to perform the traceroute testing.
Start Test button
—Click this button to begin the test. A new screen appears and display the
test results.
Cable Diagnostics
Port—
Select the port number from the drop-down menu.
Pair—
Identifies a specific pair (A, B, C, or D) in the cable. Each cable consists of 8 pins (4 pairs).
Cable Length—
Displays the length of the cable in meters.
Downloaded from
www.Manualslib.com
manuals search engine
Page 94 / 180
WRVS4400N User Guide
88
Administration Tab
Setting Up and Configuring the Router
Status—
Displays the status of the pair.
Change these settings as described and click
Save Settings
to apply your changes, or click
Cancel Changes
to cancel your changes. Help information is displayed on the right-hand side
of the screen, and click
More
for additional details.
Backup & Restore
Backup
Backup button.
To download a copy of the current configuration and store the file on your PC,
click
Backup
to start the download.
Restore Configuration
Select a previously saved configuration file to restore the configuration to the Wireless Router.
This could be helpful if you want to use the same configuration on a new hardware or after
resetting to the factory defaults. You can either enter the file path name yourself or use the
Browse
button to select a file from the Windows file system.
Browse
button—Click this button to select a previously saved configuration from the Windows
file system.
Restore
button—Click this button to start the restoration process.
Downloaded from
www.Manualslib.com
manuals search engine
Page 95 / 180
WRVS4400N User Guide
89
Administration Tab
Setting Up and Configuring the Router
Factory Defaults
Restore Factory Defaults
—Click this button to reset all configuration settings to their default
values—All settings that have been saved will be lost when the default settings are restored.
After clicking the button, another screen appears. Click
OK
to continue. Another screen appears
while the system reboots.
Reboot
Reboot—
Click this button to reboot the Router. This operation will not cause the Router to lose
any of its stored settings.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live