Page 16 / 163
Scroll up to view Page 11 - 15
Introduction
Mounting the Cisco RV120W
Cisco RV120W Administration Guide
7
1
STEP 3
Place the wall-mount slots over the screws and slide the device down until the
screws fit snugly into the wall-mount slots.
Page 17 / 163
Introduction
Connecting the Equipment
Cisco RV120W Administration Guide
8
1
Connecting the Equipment
Before you begin the installation, make sure that you have the following equipment
and services:
Required
•
Functional Internet Connection (Broadband DSL or cable modem).
•
Ethernet cable for WAN (Internet) connection.
•
PC with functional network adapter (Ethernet connection) to run the Setup
Wizard or the Device Manager. The Setup Wizard is supported on Microsoft
Windows 2000, Windows XP, Windows Vista, and Windows 7. The Device
Manager is supported on the following web browsers:
-
Microsoft Internet Explorer 6.0 and later
-
Mozilla Firefox 3.0 and later
-
Apple Safari 3.0 or later.
•
Ethernet cable (provided) to connect the firewall to a PC for configuration.
Optional
•
Uninterruptible Power Supply (UPS) to provide backup power to essential
devices (strongly recommended).
•
Ethernet cables for LAN interfaces, if you want to connect additional
devices to the firewall’s LAN ports.
Page 18 / 163
Introduction
Connecting the Equipment
Cisco RV120W Administration Guide
9
1
To connect your firewall to the Internet:
STEP 1
Power off all equipment, including the cable or DSL modem, the PC you will use to
connect to the RV120W, and the RV120W.
STEP
2
Use an Ethernet cable to connect the WAN port of the Cisco RV120W to your
cable or DSL modem.
Page 19 / 163
Introduction
Connecting the Equipment
Cisco RV120W Administration Guide
10
1
STEP 3
Connect one end of a different Ethernet cable to one of the LAN (Ethernet) ports on
the back of the RV120W. (In this example, the LAN 2 port is used.) Connect the other
end of the cable to an Ethernet port on the PC.
STEP
4
Power on the cable or DSL modem and wait until the connection is active.
Page 20 / 163
Introduction
Connecting the Equipment
Cisco RV120W Administration Guide
11
1
STEP
5
Connect the power adapter to the Cisco RV120W power port (12VDC).
!
CAUTION
Use only the power adapter that is supplied with the device. Using a different
power adapter could damage the device.
STEP
6
Plug the other end of the adapter into an electrical outlet. You may need to use a
specific plug (supplied) for your country.
19216811.live