1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. RV-120W
    5. /
  5. 30
Page 146 / 163 Scroll up to view Page 141 - 145
Viewing the Cisco RV120W Status
Viewing the Dashboard
Cisco RV120W Administration Guide
137
8
The view of the back panel shows you which ports are used (colored in green) and
allows you to click the port to obtain information about the connection.
•
To view a port’s connection information, click the port.
•
To refresh the port information, click
Refresh
.
•
To close the port information sheet, click
Close
.
The
Dashboard
page displays the following:
Device Information
Resource Utilization
Syslog Summary
Indicates whether logging is enabled for these event categories:
•
Emergency
•
Alert
•
Critical
•
Error
•
Warning
Host Name
The name of the device.
To change the name, click
Edit
. See
Configuring
IPv4 LAN (Local Network) Settings, page 27
.
Firmware Version
The current software version the device is running.
Serial Number
The serial number of the device.
CPU
CPU utilization.
Memory
Memory utilization.
Current Time
Time of day.
System Up Time
How long the system has been running.
Page 147 / 163
Viewing the Cisco RV120W Status
Viewing the Dashboard
Cisco RV120W Administration Guide
138
8
To view the logs, click
details
. For more information see
Viewing Logs, page 145
.
To manage logs, click
manage logging
. For more information see
Configuring
Logging, page 126
.
LAN (Local Network) Interface
To view the LAN settings, click
details
. For more information see
Viewing Port
Statistics, page 148
.
WAN (Internet) Information
To view the WAN settings, click
details
. For more information see
Viewing Port
Statistics, page 148
.
Wireless Networks
Lists the status of the four wireless network SSIDs
To view the router’s wireless settings, click
details
. For more information see
Viewing the Wireless Statistics, page 142
.
MAC Address
The MAC address of the router.
IPv4 Address
The local IP address of the router.
To change the IP address, see
Configuring the
IPv4 WAN (Internet), page 20
.
DHCP Server
The status of the router’s DHCP server
(enabled or disabled).
To configure the DHCP settings, see
Configuring
the IPv4 WAN (Internet), page 20
.
IP Address
The IP address of the router’s WAN port.
To change the IP address, see
Configuring the
WAN (Internet) Settings, page 19
.
State
The state of the Internet connection (up or down).
Page 148 / 163
Viewing the Cisco RV120W Status
Viewing the System Summary
Cisco RV120W Administration Guide
139
8
VPN
Viewing the System Summary
The
System Summary
page displays a summary of the router’s settings.
To view a summary of system settings:
STEP 1
Choose
Status
>
System Summary
.
STEP
2
Click
Refresh
to obtain the latest information.
STEP
3
If applicable, to change a system setting, click its corresponding
Edit
link.
The
System Summary
page displays this information:
System Information
Site-to-Site Tunnels
Displays the connected IPSec VPN tunnels.
PPTP Users
The number of Point-to-Point Tunneling Protocol
(PPTP) users.
QuickVPN Users
The number of QuickVPN users.
Host Name
The name of the device.
Firmware Version
Current software version the device is running.
Firmware MD5
Checksum
The message-digest algorithm used to verify the
integrity of files.
PID VID
Product ID and version ID of the device.
Serial Number
The serial number of the device.
Page 149 / 163
Viewing the Cisco RV120W Status
Viewing the System Summary
Cisco RV120W Administration Guide
140
8
LAN (Local Network) Information
MAC Address
The MAC address of the device.
IPv4 Address
The IP address and subnet mask of the device.
IPv6 Address
The IP address and subnet mask of the device
(shown only if IPv6 is enabled).
DHCP Server
The status of the router’s DHCP server
(enabled or disabled). If it is enabled, DHCP client
machines connected to the LAN port receive their
IP address dynamically.
DHCP Relay
Whether the device is acting as a DHCP relay.
DHCPv6 Server
Whether the device’s DHCPv6 server is enabled or
disabled. If it is enabled, DHCPv6 client systems
connected to the LAN port receive their IP address
dynamically.
Page 150 / 163
Viewing the Cisco RV120W Status
Viewing the System Summary
Cisco RV120W Administration Guide
141
8
WAN (Internet) Information (IPv4)
WAN (Internet) Information (IPv6)
MAC Address
The MAC address of the WAN port.
Connection Time
The time duration for which the connection is up.
Connection Type
Shows weather the WAN IPv4 address is obtained
dynamically through a DHCP server, assigned
statically by the user, or obtained through a PPPoE/
PPTP/L2TP ISP connection.
Connection State
Shows weather the WAN port is connected to the
Internet service provider.
DHCP Server
The IP address of the DHCP server to which the
WAN port is connected.
Lease Obtained
The the time at which lease is obtained from the
DHCP server.
Lease Duration
The duration for which the lease remains active.
IP Address
The WAN Address of the device.
Subnet Mask
The subnet mask of the WAN port.
Gateway
The gateway IP address of the WAN port.
Primary DNS Server
The IP address of the primary DNS server.
Secondary DNS Server
The IP address of the secondary DNS server.
NAT (IPv4 Only Mode)
Connection Time
The time duration for which the connection is up.
Connection Type
Shows weather the WAN IPv6 address is obtained
dynamically through a DHCP server, assigned
statically by the user, or obtained through a PPPoE/
PPTP/L2TP ISP connection.
Connection State
Shows weather the WAN port is connected to the
ISP.
IP Address
The IP address of the WAN port.
Gateway
The gateway IP address of the WAN port.
DNS Server
DNS server IP address of the WAN port.

Rate

4 / 5 based on 1 vote.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top