1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. Linksys-E2000
    5. /
  5. 7
Page 31 / 59 Scroll up to view Page 26 - 30
31
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Forwarded Range
Enter the starting and ending port
numbers of the forwarded port number range° Check
with the Internet application documentation for the port
number(s) needed°
Enabled
Select
Enabled
to enable port triggering°
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes°
Applications and Gaming > DMZ
The
DMZ
(Demilitarized
Zone)
feature
allows
one
network computer to be exposed to the Internet for use
of a special-purpose service such as Internet gaming or
videoconferencing° DMZ hosting forwards all the ports
at the same time to one computer° The Port Range
Forwarding feature is more secure because it only opens
the ports you want to have opened, while DMZ hosting
opens all the ports of one computer, exposing the
computer to the Internet°
Applications and Gaming > DMZ
DMZ
Any computer whose port is being forwarded must have
its DHCP client function disabled and have a new static IP
address assigned to it because its IP address may change
when using the DHCP function°
Enabled/Disabled
To
disable
DMZ
hosting,
select
Disabled
° To expose one PC, select
Enabled
° Then
configure the following settings:
Source IP Address
If you want any IP address to be the
source, select
Any IP Address
° If you want to specify an IP
address or range of IP addresses as the designated source,
select and complete the IP address range fields°
Destination
If you want to specify the DMZ host by IP
address, select
IP Address
and enter the IP address in
the field provided° If you want to specify the DMZ host
by MAC address, select
MAC Address
and enter the MAC
address in the field provided° To retrieve this information,
click
DHCP Client Table
°
DMZ > DHCP Client Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router° The list can be sorted by Client Name, Interface,
IP Address, and MAC Address° To select a DHCP client,
click
Select
° To update the on-screen information,
click
Refresh
° To exit this screen and return to the
DMZ
screen, click
Close
°
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes°
Applications and Gaming > QoS
Quality of Service (QoS) is a method that assigns priority
to specific types of network traffic, which often are
demanding, real-time applications, such as gaming,
videoconferencing, video streaming, and Voice over
Internet Protocol (VoIP) telephony° QoS helps to ensure
optimal performance for these types of uses°
Applications and Gaming > QoS
QoS
Wireless
WMM Support
Wi-Fi Multimedia (WMM) is a wireless
Quality of Service feature that improves quality for audio,
video, and voice applications by prioritizing wireless traffic°
To use this feature, the wireless client devices in your
network must support Wireless WMM° To disable this option,
select
Disabled
° Otherwise, keep the default,
Enabled
°
Page 32 / 59
32
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
No Acknowledgement
If you want to disable the
Router’s Acknowledgement feature, so the Router will
not re-send data if an error occurs, then select
Enabled
°
Otherwise, keep the default,
Disabled
°
Internet Access Priority
In this section, you can set the bandwidth priority for a
variety of applications and devices° There are four levels
of priority: High, Medium, Normal, or Low° When you
set priority, do not set all applications to High, because
this will defeat the purpose of allocating the available
bandwidth° If you want to select below normal bandwidth,
select
Low
° Depending on the application, a few attempts
may be needed to set the appropriate bandwidth priority°
Enabled/Disabled
To use the QoS policies you set, select
Enabled
° Otherwise, keep the default,
Disabled
°
Category
You can define the Internet access priority level for as
many categories as you want° The
Summary
section will
display all of the priority selections that you enter° Select
from the following categories:
•
Applications
Allows you to assign a priority level for a
pre-defined application or one that you add°
•
Online Games
Allows you to assign a priority level for
a pre-defined game or one that you add°
•
MAC Address
This option lets you prioritize network
traffic based on the device that is accessing the
network° For example, if you want your gaming
console to have higher priority accessing the Internet
than your computer, you can assign their priority levels
using their respective MAC addresses°
•
Ethernet Port
This option allows you to prioritize
traffic connected to a specific Ethernet port° For
example, you can assign a higher priority level to the
computer connected to port 1°
•
Voice Device
Voice devices require a higher priority
level° You can assign a higher priority level to voice
devices using their respective MAC addresses°
Summary
This lists the QoS entries you have created for your
applications and devices° Refer to
Summary
,
page 33
for
more information°
Applications
Applications
Select the appropriate application° If you
select Add a New Application, follow the instructions in
the
Add a New Application
section°
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
°
Click
Add
to save your changes° Your new entry will appear
in the Summary list°
Add a New Application
QoS > Add a New Application
Enter a Name
Enter a name for this application°
Port Range
Enter the port range that the application will
be using° For example, if you want to allocate bandwidth
for FTP, you can enter 21-21° If you need services for an
application that uses from 1000 to 1250, you enter 1000-
1250 as your settings° You can have up to three ranges
to define for this bandwidth allocation° Port numbers
can range from 1 to 65535° Check your application’s
documentation for details on the service ports used°
Select the protocol
TCP
or
UDP
, or select
Both
°
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
°
Click
Add
to save your changes° Your new entry will appear
in the Summary list°
Online Games
QoS > Online Games
Games
Select the appropriate game° If you select Add a
New Game, follow the instructions in the
Add a New Game
section°
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
°
Click
Add
to save your changes° Your new entry will appear
in the Summary list°
Add a New Game
QoS > Add a New Game
Page 33 / 59
33
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Enter a Name
Enter any name to indicate the name of
the entry°
Port Range
Enter the port range that the game will be
using° You can have up to three ranges to define for this
bandwidth allocation° Port numbers can range from 1 to
65535° Check your application’s documentation for details
on the service ports used°
Select the protocol
TCP
or
UDP
, or select
Both
°
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
°
Click
Add
to save your changes° Your new entry will appear
in the Summary list°
MAC Address
QoS > MAC Address
The MAC address of the computer you are using is
displayed°
Enter a Name
Enter a name for your device°
MAC Address
Enter the MAC address of your device°
Priority
Select the appropriate priority:
High
,
Medium
(Recommended)
,
Normal
, or
Low
°
Click
Add
to save your changes° Your new entry will appear
in the Summary list°
Voice Device
QoS > Voice Device
Enter a Name
Enter a name for your voice device°
MAC Address
Enter the MAC address of your voice
device°
Priority
Select
the
appropriate
priority:
High
(Recommended)
,
Medium
,
Normal
, or
Low
°
Click
Add
to save your changes° Your new entry will appear
in the Summary list°
Summary
This lists the QoS entries you have created for your
applications and devices°
Priority
This column displays the bandwidth priority of
High, Medium, Normal, or Low°
Name
This column displays the application, game,
device, or port name°
Information
This column displays the port range or
MAC address entered for your entry° If a pre-configured
application or game was selected, there will be no valid
entry shown in this section°
Remove
Click this option to remove an entry°
Edit
Click this option to make changes°
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes°
Administration > Management
The
Management
screen
allows
the
network’s
administrator to manage specific Router functions for
access and security°
Administration > Management
Management
To ensure the Router’s security, you will be asked for your
password when you access the Router’s browser-based
utility° The default is
admin
°
Router Password
Enter a new password for the Router°
Re-enter to confirm
Enter the password again to confirm°
Web Access
Web Utility Access
HTTP (HyperText Transport Protocol)
is the communications protocol used to connect to servers
on the World Wide Web° HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security°
Select
HTTP
or
HTTPS
° The default is
HTTP
°
Page 34 / 59
34
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
Web Utility Access via Wireless
If you are using the
Router in a public domain where you are giving wireless
access to your guests, you can disable wireless access to
the Router’s browser-based utility° You will only be able
to access the utility via a wired connection if you disable
the setting° Keep the default,
Enabled
, to allow wireless
access to the utility, or select
Disabled
to block wireless
access to the utility°
Remote Access
Remote Management
To permit remote access of the
Router from the Internet (outside the local network),
select
Enabled
° Otherwise, keep the default,
Disabled
°
Web Utility Access
HTTP (HyperText Transport Protocol)
is the communications protocol used to connect to servers
on the World Wide Web° HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security°
Select
HTTP
or
HTTPS
°
HTTP
is the default°
Remote Upgrade
If you want to be able to upgrade
the Router from the Internet (outside the local network),
select
Enabled
° (You must have the Remote Management
feature enabled as well°) Otherwise, keep the default,
Disabled
°
Allowed Remote IP Address
If you want to be able to
access the Router from any external IP address, select
Any
IP Address
° If you want to specify an external IP address or
range of IP addresses, then select the second option and
complete the fields provided°
Remote Management Port
Enter the port number that
will be open to outside access° (When you remotely access
the Router, you will need to enter the Router’s password°)
NOTE:
When you are in a remote location
and
wish
to
manage
the
Router,
enter
or
,
depending
on whether you use HTTP or HTTPS° Enter the
Router’s specific Internet IP address in place
of
xxx°xxx°xxx°xxx,
and
enter
the
Remote
Management Port number in place of yyyy°
UPnP
Universal Plug and Play (UPnP) allows the appropriate
Windows operating system to automatically configure the
Router for various Internet applications, such as gaming
and videoconferencing°
UPnP
If you want to use UPnP, keep the default,
Enabled
°
Otherwise, select
Disabled
°
Allow Users to Configure
Keep the default,
Enabled
,
if you want to be able to make manual changes to the
Router while using the UPnP feature° Otherwise, select
Disabled
°
Allow Users to Disable Internet Access
Select
Enabled
,
if you want to be able to prohibit any and all Internet
connections° Otherwise, keep the default,
Disabled
°
Backup and Restore
Backup
Configurations
To
back
up
the
Router’s
configuration settings, click this option and follow the
on-screen instructions°
Restore
Configurations
To
restore
the
Router’s
configuration settings, click this option and follow the
on-screen instructions° (You must have previously backed
up the Router’s configuration settings°)
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes°
Administration > Log
The Router can keep logs of all traffic for your Internet
connection°
Administration > Log
Log
Log
To disable the Log function, select
Disabled
° To
monitor traffic between the network and the Internet,
keep the default,
Enabled
° With logging enabled, you can
choose to view temporary logs°
View Log
To view the logs, click
View Log
°
Administration > Log > View Log
Log
•
Type
Select
Incoming Log
,
Outgoing Log
,
Security
Log
, or
DHCP Client Log
°
Page 35 / 59
35
Advanced Wireless-N Router
Linksys E2000
Chapter 3: Advanced Configuration
•
<Type> Log
The Incoming Log displays a temporary
log of the source IP addresses and destination
port numbers for the incoming Internet traffic° The
Outgoing Log displays a temporary log of the local IP
addresses, destination URLs/IP addresses, and service/
port numbers for the outgoing Internet traffic° The
Security log displays the login information for the
browser-based utility° The DHCP Client Log displays
the LAN DHCP server status information°
Click
Save the Log
to save this information to a file on
your computer’s hard drive° Click
Refresh
to update
the log° Click
Clear
to clear all the information that is
displayed°
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to clear your changes°
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet° This screen also allows you to
reset the Router°
Administration > Diagnostics
Reboot
Reboot
Click
Reboot
to reset the Router°
Diagnostics
Ping Test
Ping checks the status of a connection°
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test°
Packet Size
Enter the packet size you want to use° The
default is
32
bytes°
Times to Ping
Enter the number of times you wish to test
the connection° The default is
5
°
Start to Ping
To run the test, click this option° The
Ping
Test
screen shows if the test is successful° Click
Close
to
return to the
Diagnostics
screen° Click
Stop
to stop the
test°
Diagnostics > Ping
Traceroute Test
Traceroute checks the performance of a connection°
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test°
Start to Traceroute
To run the test, click this option°
The
Traceroute
screen shows if the test is successful° Click
Close
to return to the
Diagnostics
screen° Click
Stop
to
stop the test°
Diagnostics > Traceroute

Rate

4.5 / 5 based on 2 votes.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top