Cisco Linksys-E1000 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Cisco

Linksys-E1000

Page 36 / 60 Scroll up to view Page 31 - 35

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Administration > Log

The Router can keep logs of all traffic for your Internet

connection°

Administration > Log

Log

To disable the Log function, keep the default,

Disabled

° To monitor traffic between the network and the

Internet, select

Enabled

° With logging enabled, you can

choose to view temporary logs°

Click

Save Settings

to apply your change, or click

Cancel

Changes

to clear your change°

View Log

When you wish to view the logs, click this

button°

Log > View Log

Log

•

Type

Select

Incoming Log

Outgoing Log

Security

Log

, or

DHCP Client Log

•

<Type> Log

The Incoming Log displays a temporary

log of the source IP addresses and destination

port numbers for the incoming Internet traffic° The

Outgoing Log displays a temporary log of the local

IP addresses, destination URLs/IP addresses, and

service/port numbers for the outgoing Internet traffic°

The Security log displays the login information for the

browser-based utility° The DHCP Client Log displays

the local DHCP server status information°

Click

Save the Log

to save this information to a file on

your computer’s hard drive° Click

Refresh

to update

the log° Click

Clear

to clear all the information that is

displayed°

Administration > Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to

check the connections of your network devices, including

connection to the Internet°

Administration > Diagnostics

Diagnostics

Reboot

Click

Reboot

to restart the Router°

Ping Test

Ping checks the status of a connection°

IP or URL Address

Enter the address of the computer,

device, or website whose connection you wish to test°

Packet Size

Enter the packet size you want to use° The

default is

bytes°

Times to Ping

Enter the number of times you wish to test

the connection° The default is

Start to Ping

To run the test, click this button° The

Ping 

screen shows if the test is successful° Click

to return

to the

Diagnostics

screen° Click

Stop

to stop the test°

Diagnostics > Ping

Page 37 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Traceroute Test

Traceroute checks the performance of a connection°

IP or URL Address

Enter the address of the computer,

device, or website whose connection you wish to test°

Start to Traceroute

To run the test, click this button°

The

Traceroute 

screen shows if the test is successful° Click

to return to the

Diagnostics

screen° Click

Stop

stop the test°

Diagnostics > Traceroute

Administration > Factory Defaults

The

Factory  Defaults

screen allows you to restore the

Router’s configuration to its factory default settings°

NOTE:

Do not restore the factory defaults unless

you are having difficulties with the Router and

have

exhausted

all

other

troubleshooting

measures° Once the Router is reset, you will have

to re-enter all of your configuration settings°

Administration > Factory Defaults

Factory Defaults

Restore All Settings

To reset the Router’s settings to the

defaults, click this button and then follow the on-screen

instructions° Any settings you have saved will be lost

when the default settings are restored°

Administration > Firmware Upgrade

The

Firmware  Upgrade

screen allows you to upgrade the

Router’s firmware° Do not upgrade the firmware unless

you are experiencing problems with the Router or the new

firmware has a feature you want to use°

Administration > Firmware Upgrade

NOTE:

The Router may lose the settings

you have customized° Before you upgrade

its firmware, write down all of your custom

settings° After you upgrade its firmware, you

will have to re-enter all of your configuration

settings°

Page 38 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

Firmware Upgrade

Before

upgrading

the

firmware,

download

the

Router’s

firmware

upgrade

file

from

the

website,

www.linksys.com/support

Please select a file to upgrade the firmware

Click

Browse

and select the firmware upgrade file°

Start to Upgrade

After you have selected the appropriate

file, click this button, and f

ollow the on-screen instructions°

WARNING:

Do not interrupt the upgrade

process° You should not turn off the power or

press the Reset button during the upgrade

process° Doing so may disable the Router°

Status > Router

The

Router

screen displays information about the Router

and its current settings°

Status > Router

Router Information

Firmware Version

The version number of the Router’s

current firmware is displayed°

Firmware Verification

The unique identifier of the

firmware is displayed°

Current Time

The time set on the Router is displayed°

Internet MAC Address

The Router’s MAC address, as

seen by your ISP, is displayed°

Host Name

The Host Name of the Router is displayed (if it

was entered on the

 Setup > Basic Setup

screen)°

Domain Name

The Domain Name of the Router is

displayed (if it was entered on the

  Setup  >  Basic  Setup

screen)°

Internet Connection

This section shows the current network information

stored in the Router° The information varies depending on

the Internet connection type selected on the

Setup > Basic 

Setup

screen°

For a DHCP connection, select

Release IP Address

Renew IP Address

as appropriate to release or renew

a DHCP lease° For a PPPoE or similar connection, select

Connect

Disconnect

as appropriate to connect to or

disconnect from the Internet°

Click

Refresh

to update the on-screen information°

Status > Local Network

The

Local Network

screen displays information about the

local network°

Status > Local Network

Local Network

Local MAC Address

The MAC address of the Router’s

local, wired interface is displayed°

Router IP Address

The Router’s IP address, as it appears

on your local network, is displayed°

Subnet Mask

The Subnet Mask of the Router is displayed°

DHCP Server

The status of the Router’s DHCP server

function is displayed°

Start IP Address

For the range of IP addresses that can

be used by devices on your local network, the starting IP

address is displayed°

End IP Address

For the range of IP addresses that can

be used by devices on your local network, the ending IP

address is displayed°

Page 39 / 60

Wireless-N Router

Linksys E1000

Chapter 3: Advanced Configuration

DHCP Client Table

Click this button to view a list of

computers or other devices that are using the Router as

a DHCP server°

DHCP Client Table

The DHCP Client Table lists computers and other

devices that have been assigned IP addresses by the

Router° The list can be sorted by IP Address, MAC

Address, Interface, and Client Name° To remove a

DHCP client, click

Delete

° To update the on-screen

information, click

Refresh

° To exit this screen and

return to the

Local Network 

screen, click

Status > Wireless Network

The

Wireless  Network

screen displays information about

your wireless network°

Status > Wireless Network

Wireless Network

MAC Address

The MAC address of the Router’s local,

wireless interface is displayed°

Mode

The wireless mode is displayed°

Network Name (SSID)

The name of the wireless network,

which is also called the SSID, is displayed°

Channel Width

The Channel Width setting (selected on

the

Wireless >

Basic Wireless Settings

screen) is displayed°

Channel

The Channel setting selected on the

Basic 

Wireless Settings

screen is displayed°

Security

The wireless security method used by the

Router is displayed°

SSID Broadcast

The status of the SSID Broadcast option

is displayed°

Page 40 / 60

Linksys E1000

Appendix A: Troubleshooting

Wireless-N Router

Appendix A: Troubleshooting

Your computer cannot connect to the Internet.

Follow these instructions until your computer can connect

to the Internet:

•

Make sure that the Router is powered on° The Power

LED should be lit and not flashing°

•

If the Power LED is flashing, then power off all of

your network devices, including the modem, Router,

and computers° Then power on each device in the

following order:

1°

Cable or DSL modem

2°

Router

3°

Computer

•

Check the cable connections° The computer should

be connected to one of the ports numbered 1-4 on

the Router, and the modem must be connected to the

Internet port on the Router°

The modem does not have an Ethernet port.

The modem is a dial-up modem for traditional dial-up

service° To use the Router, you need a cable/DSL modem

and high-speed Internet connection°

You cannot use the DSL service to connect manually to

the Internet.

After you have installed the Router, it will automatically

connect to your Internet Service Provider (ISP), so you no

longer need to connect manually°

The DSL telephone line does not fit into the Router’s

Internet port.

The Router does not replace your modem° You still need

your DSL modem in order to use the Router° Connect the

telephone line to the DSL modem, and then insert the

setup CD into your computer° Click

Set up your Linksys

Router

and follow the on-screen instructions°

When you double-click the web browser, you are

prompted for a username and password. If you want to

get rid of the prompt, follow these instructions.

Launch the web browser and perform the following steps

(these steps are specific to Internet Explorer but are similar

for other browsers):

1° Select

Tools

Internet Options

2° Click the

Connections

tab°

3° Select

Never dial a connection

4° Click

The Router does not have a coaxial port for the cable

connection.

The Router does not replace your modem° You still need

your cable modem in order to use the Router° Connect

your cable connection to the cable modem, and then

insert the setup CD into your computer° Click

Set up your

Linksys Router

and follow the on-screen instructions°

The computer cannot connect wirelessly to the network.

Make sure the wireless network name or SSID is the same

on both the computer and the Router° If you have enabled

wireless security, then make sure the same security

method and key are used by both the computer and the

Router°

You need to modify the settings on the Router.

Router settings can be modified using the Cisco Connect

software; refer to

How to Access Cisco Connect

page 12

To modify the advanced settings, go to

Advanced settings

Refer to

Advanced Settings

page 12

You want to access the browser-based utility

from Cisco

Connect.

To enter the browser-based utility from Cisco Connect,

follow these steps:

1° Open Cisco Connect°

2°

On the main menu, click

Router settings

3° Click

Advanced settings

4° Write down the username and password that are

displayed° (To help protect your password, you can

copy it to the Clipboard by clicking

Copy password

°)

5° Click

6° Your web browser automatically opens° Enter the

username and password, and then click

° (If you

copied the password to the Clipboard in step 4, press

Ctrl-V

to paste it into the

Password

field°)

When you try to log into the browser-based utility, your

password does not work.

Your wireless security password also serves as the

browser-based utility’s login password° To see this

password:

1° Open Cisco Connect°

2°

On the main menu, click

Router settings

3° The

Password 

is displayed on the left side of the screen°

WEB:

If your questions are not addressed

here, refer to our E1000 section on the web,

Rate

Popular Cisco Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share