1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. DDR2200
    5. /
  5. 47
Page 231 / 272 Scroll up to view Page 226 - 230
Upstream Quality of Service
4036168 Rev B
209
2
Click
Add
. The Add Upstream QoS Rule screen opens.
3
In the Name field, enter the name of the QoS rule.
4
In the LAN Port field, select the LAN port for which you want to apply the rule.
5
In the Protocol field, select the protocol that you want to use from the following
options:
TCP/UDP
TCP
UDP
ICMP
6
In the IP Address field, enter the source and destination addresses.
7
In the Subnet Mask field, enter the source and destination subnet masks.
8
In the Port Number field, enter the source and destination ports.
9
In the MAC address field, enter the MAC address for the source from which the
packets are being sent and the MAC address for the destination. The MAC
address should be in the form of 6 pairs of hex digits. For example,
aa:ee:ff:11:03:24.
Page 232 / 272
Chapter 7
Advanced Configuration
210
4036168 Rev B
10
In the MAC Mask field, enter the mask for the source MAC address from which
the packets are being sent and the MAC Mask for the destination MAC address.
A MAC mask of ff:ff:ff:00:00:00 matches all devices made by the same
manufacturer (identified by the first three pairs of the MAC address).
A MAC
mask of ff:ff:ff:ff:ff:ff matches a single device.
11
In the DSCP Check field, select the matching DSCP value from the list of Diffserv
code point.
12
Select the
Marker
field and choose from the list of Diffserv code point (DSCP)
values to mark the specified data flow.
13
Select the
Queue
field and choose from the list of queues.
14
Click
Save
.
Queues Configuration
Use Queues Configuration to configure QoS queues for each WAN connection type.
By configuring the queues, you determine how the packets will be processed
according to the assigned priorities.
A queue with a higher priority has lower queue
precedence.
Path:
Advanced > QoS > Queues Configuration
To set up your queues, complete the following steps.
1
Click
Advanced
on the main screen. The Upstream Quality of Service screen
opens.
Page 233 / 272
Upstream Quality of Service
4036168 Rev B
211
2
Click
Queues Configuration
. The Queues Configuration screen opens.
3
Click
Add
to add a queue.
4
For the Queue Configuration Status, select
Enable
or
Disable
to enable or
disable your queue configuration.
5
Select from the Queue drop-down list for the associated WAN interface or
connection type for Queue.
6
For the Queue Precedence field, select the Precedence as the relative priority for
the queue.
A smaller number indicates a higher priority.
7
Click
Save/Apply
to save the changes.
Page 234 / 272
Chapter 7
Advanced Configuration
212
4036168 Rev B
Remote Management
The Remote Management -- TR-069 Client screen allows an auto-configuration
server (ACS) to perform auto-configuration, provisioning, collection of statistics, and
diagnostics for this residential gateway.
Path
:
Advanced > Remote Management
Page 235 / 272
Remote Management
4036168 Rev B
213
Configuring the TR-069 Client Options
To configure the TR-069 client options, complete the following steps.
1
Click
Advanced
on the main screen. The Remote Management -- TR-069 Client
screen opens.
2
In the Inform field, choose one of the following options:
Click
Enable
to enable the periodic "inform" messages from the residential
gateway.
Click
Disable
to disable the inform messages to the residential gateway.
3
In the Inform Interval field, enter the frequency that the inform messages are sent
from the residential gateway to the auto-configuration server.
4
In the ACS URL field, enter the URL for the auto-configuration server.
5
In the ACS User Name field, enter the user name for the auto-configuration
server.
6
In the ACS Password field, enter the password for the auto-configuration server.
7
Check the
Connection Request Authentication
field.
8
In the Connection Request User Name field, enter the name of the connection
request.
9
In the Connection Request Password field, enter the password for the connection
request.
10
Click
GetRPCMethods
to obtain the list of remote procedural calls (RPC)
supported by the auto-configuration server.
11
Click
Save/Apply
to save the configuration changes.

Rate

3.5 / 5 based on 2 votes.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top