1. Home
    2. /
  2. Manuals
    3. /
  3. Cisco
    4. /
  4. DDR2200
    5. /
  5. 42
Page 206 / 272 Scroll up to view Page 201 - 205
Chapter 6
Security Configuration
184
4036168 Rev B
Removing an Outgoing IP Filter
To remove an outgoing IP filter, complete the following steps.
1
Click
Security
on the main screen. The MAC Filtering screen opens by default.
2
Select the
Outgoing IP Filtering tab
. The Outgoing IP Filtering screen opens.
3
From the Outgoing IP Filtering screen, select
Remove
in the Remove column
next to the filter you wish to remove.
4
Click
Remove
to remove the filter.
Page 207 / 272
Parental Control Setup - Filtering Function
4036168 Rev B
185
Parental Control Setup - Filtering Function
The Client IP/MAC Filtering Setup screen allows you to configure the residential
gateway to restrict access to the Internet, email, or other network services at specific
days and times. You can set time restrictions for a single computer, a range of
computers, or multiple computers.
Path
: Security >Firewall > Parental Control
Page 208 / 272
Chapter 6
Security Configuration
186
4036168 Rev B
Adding Time of Day Restrictions
The Filtering Function screen allows you to set restrictions that block access to the
Internet during certain times of the day. This screen adds time of day restrictions to a
special LAN device connected to the residential gateway. The browser's MAC
Address automatically displays the MAC address of the LAN device where the
browser is running. To restrict other LAN devices, select the
Other MAC Address
option and enter the MAC address of the other LAN device. To find out the MAC
address of a Windows based PC, go to a command window and type
ipconfig /all
.
Path
: Security > Firewall > Parental Control
To add time of day restrictions, complete the following steps.
1
Click
Security
on the main screen. The MAC Filtering screen opens by default.
Page 209 / 272
Parental Control Setup - Filtering Function
4036168 Rev B
187
2
Click the
Firewall
tab. The Filtering Function screen opens.
3
Check the
Enable Filtering Function
check box to enable the filtering function.
The Client IP MAC Filtering screen populates with any time restrictions that are
set.
Page 210 / 272
Chapter 6
Security Configuration
188
4036168 Rev B
4
Click
Add PC
. The Add Filtering Function screen opens.
5
In the Client PC Description field, enter a description of the PC for which you
want to block services.
6
In the Choose mode field, select
IP mode or MAC mode from the drop-down
menu.
7
Enter the IP address in the Client PC IP Address field, or enter the MAC address
in the MAC address field depending upon the mode you selected in step 6.
8
Under Service Name area, check the
Blocking
check box for every service that
you wish to filter.
9
In the Scheduling Week Day area, check the check boxes next to each day where
you want to set up time of day restrictions. If you want to apply the time of day
restrictions to everyday, check the Everyday check box. For example, check the F,
Sa, and Su check boxes to apply time of day restrictions to Friday, Saturday, and
Sunday.
10
In the Time area set the time as follows:
Click the 24Hours option to apply the restrictions 24 hours a day
Click the option where you select the time from the drop-down menus. Use
the drop down menus to enter the time when you want the restriction to start
and end.

Rate

3.5 / 5 based on 2 votes.

Popular Cisco Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top