United States FCC Compliance

xii

4036168 Rev B

Repairs to certified equipment should be made by an authorized Canadian maintenance

facility designated by the supplier. Any repairs or alterations made by the user may give the

telecommunications company cause to request the user to disconnect the equipment. Users

should ensure for their own protection that the electrical ground connections of the power

utility, telephone lines and internal metallic water pipe system, if present, are connected

together. This precaution may be particularly important in rural areas.

CAUTION:

Users should not attempt to make such connections themselves, but should

contact the appropriate electric inspection authority, or electrician, as

appropriate.

RF Exposure Statements

Note:

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter. This equipment should be installed and operated with a minimum

distance of 7.9 inches (20 cm) between the radiator and your body.

US

This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1

(American National Standards Institute) limits. The evaluation was based in accordance with

FCC OET Bulletin 65C rev 01.01 in compliance with Part 2.1091 and Part 15.27. The minimum

separation distance from the antenna to general bystander is 7.9 inches (20 cm) to maintain

compliance.

Canada

This system has been evaluated for RF exposure for humans in reference to Canada Health

Code 6 (2009) limits. The evaluation was based on evaluation per RSS-102 Rev 4. The

minimum separation distance from the antenna to general bystander is 7.9 inches (20 cm) to

maintain compliance.

EU

This system has been evaluated for RF exposure for humans in reference to the ICNIRP

(International Commission on Non-Ionizing Radiation Protection) limits. The evaluation was

based on the EN 50385 Product Standard to Demonstrate Compliance of Radio Base Stations

and Fixed Terminals for Wireless Telecommunications Systems with basic restrictions or

reference levels related to Human Exposure to Radio Frequency Electromagnetic Fields from

300 MHz to 40 GHz. The minimum separation distance from the antenna to general

bystander is 20 cm (7.9 inches).

Australia

This system has been evaluated for RF exposure for humans as referenced in the Australian

Radiation Protection standard and has been evaluated to the ICNIRP (International

Commission on Non-Ionizing Radiation Protection) limits. The minimum separation distance

from the antenna to general bystander is 20 cm (7.9 inches).

20091016 FCC DSL_Dom and Intl

CE Compliance

4036168 Rev B

xiii

CE Compliance

Declaration of Conformity with Regard to the EU Directive 1999/5/EC

(R&TTE Directive)

This declaration is only valid for configurations (combinations of software, firmware and

hardware) supported or provided by Cisco Systems for use within the EU. The use of

software or firmware not supported or provided by Cisco Systems may result in the

equipment no longer being compliant with the regulatory requirements.

CE Compliance

xiv

4036168 Rev B

Note:

The full declaration of conformity for this product can be found in the Declarations of

Conformity and Regulatory Information section of the appropriate product hardware

installation guide, which is available on Cisco.com.

The following standards were applied during the assessment of the product against the

requirements of the Directive 1999/5/EC:



Radio: EN 300 328



EMC: EN 301 489-1 and EN 301 489-17



Safety: EN 60950 and EN 50385

The CE mark and class-2 identifier are affixed to the product and its packaging. This product

conforms to the following European directives:

-1999/5/EC

National Restrictions

This product is for indoor use only.

France

For 2.4 GHz, the output power is restricted to 10 mW EIRP when the product is used

outdoors in the band 2454 - 2483,5 MHz. There are no restrictions when used in other parts of

the 2,4 GHz band. Check http://www.arcep.fr/ for more details.

Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements

utilisés en extérieur dans la bande 2454 - 2483,5 MHz. Il n'y a pas de restrictions pour des

utilisations dans d'autres parties de la bande 2,4 GHz. Consultez http://www.arcep.fr/ pour

de plus amples détails.

Italy

This product meets the National Radio Interface and the requirements specified in the

National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating

within the boundaries of the owner's property, its use requires a “general authorization.”

Please check http://www.comunicazioni.it/it/ for more details.

Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano

Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del

proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”.

Consultare http://www.comunicazioni.it/it/ per maggiori dettagli.

Latvia

The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic

Communications Office. Please check http://www.esd.lv for more details.

2,4 GHz frekvenču joslas izmantošanai ārpus telpām nepieciešama atļauja no Elektronisko

sakaru direkcijas. Vairāk informācijas: http://www.esd.lv.

Note:

The regulatory limits for maximum output power are specified in EIRP. The EIRP level

of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the

output power available at the connector (specified in dBm).

CE Compliance

4036168 Rev B

xv

Antennas

Use only the antenna supplied with the product.

20090312 CE_Gateway