Page 56 / 272
Scroll up to view Page 51 - 55
Chapter 3
Configuration and Operation
34
4036168 Rev B
LAN Statistics
The Statistics -- LAN screen displays statistics for the local area network (LAN). This
screen shows the number of transmitted and received packets on the LAN interface
for Ethernet, USB, and wireless devices.
Path
:
System > Statistics > LAN
Reset Statistics
To reset the statistics, click
Reset Statistics
on the screen. This action clears the
counters and sets them to zero for the packets received and transmitted on the LAN
interface.
Page 57 / 272
WAN Statistics
4036168 Rev B
35
WAN Statistics
The Statistics -- WAN screen displays statistics for the devices and interfaces on the
wide area network (WAN). This screen shows the number of transmitted and
received packets for the DSL WAN interface.
Path
:
System > Statistics > WAN
Reset Statistics
To reset the statistics, click
Reset Statistics
on the screen. This action clears the
counters and sets them to zero for the packets received and transmitted on the WAN
interface.
Page 58 / 272
Chapter 3
Configuration and Operation
36
4036168 Rev B
ATM Statistics
The Statistics -- ATM screen displays statistics on the ATM interface. This screen
shows the ATM Layer-2 statistics such as the number of ATM cells transmitted and
received over the ATM interface.
Path
:
System > Statistics > ATM
Reset Statistics
To reset the statistics, click
Reset
on the screen. This action clears the counters and
sets them to zero for the packets received and transmitted on the ATM interface.
Page 59 / 272
Tools - Update Software
4036168 Rev B
37
Tools - Update Software
The Tools -- Update Software screen allows you to update the software for the
residential gateway with a new version.
Path
:
System > Management > Configuration > Update Software
Page 60 / 272
Chapter 3
Configuration and Operation
38
4036168 Rev B
Updating Software
To update the software for the residential gateway, complete the following steps.
1
Click
System
on the main screen.
2
Click
Management
. The Configuration screen opens with the Configuration tab
in the forefront.
3
Click
Update Software
. The Tools Update Software screen opens.
Note:
This screen also gives you the option of uploading the bonding master
image or the dual image (master and slave firmware together).
4
In the Software File Name field, click
Browse
to locate the software image file.
Then:
To restore the residential gateway to factory defaults following the update,
check the
Restore to default settings after update software image
option.
To retain the current residential configuration following the update, leave
this option unchecked.
19216811.live