Page 11 / 80
Scroll up to view Page 6 - 10
3. Connecting ENDSL-A2+4R Router via Ethernet and
USB
You can connect ENDSL-A2+4R router with PC through either Ethernet cable or USB
cable.
After connection is established, you can configure the host PC to be a DHCP client.
You have to repeat the same steps for every host PC on your network if you use DHCP
function on your router.
3.1 Setup ENDSL-A2+4R router via Ethernet Cable
If there is an available LAN card present on your PC, you just simply connect ADSL
router and PC through the Ethernet cable. Once you establish Internet connection, you could
browse the Web through the Ethernet cable.
3.2 Setup ENDSL-A2+4R router via USB Cable
You can connect the ENDSL-A2+4R router with PC via USB cable when there is no LAN
card present on your PC. USB cable acts as another LAN connection in this scenario. Once
you establish Internet connection, you could browse the Web through the USB cable.
USB Device Driver Installation for
Windows Vista/XP/2000/ME/98SE
Step 1:
Connect ENDSL-A2+4R Router and PC with USB cable.
Step 2:
Once
“Found New Hardware Wizard”
window pops out, chooses
“Install from a list
or specific location (advanced)”
and click
“Cancel”
:
10
Page 12 / 80
(Figure 1: For Windows Vista)
(Figure 2: For Windows 2000 and XP)
(Figure 3: For Windows 98SE and ME)
11
Page 13 / 80
Step 3:
Insert the installation CD and the Easy Setup main page will appear as below,
Install USB Driver:
If router is connected through USB cable, click here to install USB driver.
Quick Setup:
If router is connected through Ethernet cable or after USB driver is loaded, click
here to set the ADSL Router.
USER MANUAL:
This CD provides Easy Setup and ADSL Router
.
Easy Setup
describes the
installation procedures via Quick Setup utility and
ADSL Router
describes detailed router
setup and configuration.
Adobe:
Click here to install Acrobat Reader.
(Acrobat 8 Reader for Windows Vista/XP; Acrobat 6 Reader for Windows 2000/ME/98SE)
Panda:
Click here to start Panda Anti Virus program.
(Panda only supports Windows XP/2000/ME/98SE OS).
Exit:
Click here to exit the installation procedures
12
Page 14 / 80
Step 4:
If router is connected with USB cable, click
“Install USB Driver”
, the software kit will
automatically install USB driver. Please wait for a while during the configuration.
Step 5:
For
Windows XP
OS, Click “
Continue Anyway
” to process the next step.
13
Page 15 / 80
Step 6:
After device installation has successfully installed ADSL USB Modem, click
“OK”
to
exit.
[Note]
In
Windows 98SE
Operation System, the setup program will ask restart the computer
to complete the installation. Please follow the below processes:
Step 6:
Click
“OK”
to restart your computer.
Step 7:
After system is rebooted, Insert Disk information window will show as below, click
“
OK
” to continue.
14
Step 8:
The program will automatically direct the program files which is necessary. Click “
OK
”
to continue.
19216811.live