Page 66 / 80
Scroll up to view Page 61 - 65
Dynamic DNS
: Choose the option for
Activated
or
Deactivated
DDNS.
Service Provider:
The default Dynamic DNS service provider is
www.dyndns.org
.
My Host Name:
Type the domain name assigned to your ADSL by your Dynamic DNS
provider.
E-mail Address
: Type your e-mail address.
Username:
Type your user name.
Password:
Type the password assigned to you.
Wildcard support:
Select
Yes
or
No
to turn on DYNDNS Wildcard.
DYNDNS
Wildcard
-->
Enabling
the
wildcard
feature
for
your
host
causes
*.yourhost.dyndns.org to be aliased to the same IP address as yourhost.dyndns.org. This
feature is useful if you want to be able to use, for example, www.yourhost.dyndns.org and still
reach your hostname.
SAVE:
Click
SAVE
to save your changes.
4.5.6
CWMP
65
TR-069
is a
CPE WAN Management Protocol
(
CWMP
). As a bidirectional SOAP/HTTP
based protocol it provides the communication between
CPE
and
Auto Configuration Servers
(
ACS
). It includes both a safe auto configuration and the control of other CPE management
functions within an integrated framework. In the course of the boom of the broadband market,
the number of different Internet access possibilities grew as well (e.g. modems, routers,
Page 67 / 80
gateways, Set-top box, paddles, VoIP-phones). At the same time the configuration of this
equipment became more complicated -- too complicated for the end-users. For this reason the
TR-069 standard was developed. It provides the possibility of auto configuration of these
access types. The technical specifications are managed and published by the DSL Forum.
Using TR-069 the terminals can get in contact with the
Auto Configuration Servers (ACS)
and establish the configuration automatically. Accordingly other service functions can be
provided. TR-069 is the current standard for activation of terminals in the range of DSL
broadband market.
66
Page 68 / 80
4.6 Maintenance
4.6.1
Administration
There is only one account that can access Web-Management interface-
Administration
.
Admin has read/write access privilege. In this web page, you can set new password for admin.
New Password:
Type the new password in this field.
Confirm Password:
Type the new password again in this field.
Note:
If you ever forget the password to log in, you may press the RESET button up to 6
second to restore the factory default settings. The Factory Default Settings for User
Name & Password are
admin
&
trendchip
.
4.6.2
Time Zone
67
The system time is the time used by the device for scheduling services. You can
manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP server is
set, you will only need to set the time zone. If you manually set the time, you may also set
Daylight Saving dates and the system time will automatically adjust on those dates.
Page 69 / 80
Current Date/Time:
This field displays an updated Date and Time when you reenter this
menu.
[Time Synchronization]
Synchronize time with:
You can choose
“NTP Server automatically”, “PC’s Clock”, or
“Manually”
to coordinate the time.
Time Zone:
Choose the Time Zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
Daylight Saving:
Choose
“Enabled”
or
“Disabled”
to use daylight savings time.
NTP Server Address:
Type the IP address or domain name of your timeserver. Check with
your ISP/network administrator if you are unsure of this information.
68
4.6.3
Firmware
You can upgrade the
firmware
of the router in this page. Make sure the firmware you want
to use is on the local hard drive of the computer. Click on
Browse
to browse the local had drive
and locate the firmware to be used for the update. Then press
UPGRADE
to upload new
Firmware.
It might take several minutes, don’t power off it during upgrading. Device will
restart after the upgrade!!
After a success upload, the system automatically restarts. Please wait for the device to
finish restarting. This should take about 2 minutes or more. You need to log in again if you want
to access the device.
Page 70 / 80
Current Firmware Ver.:
This filed displays the current firmware version.
New Firmware Location:
Type in the location of the file you want to upload in this field or click
Browse…
to find it.
UPGRADE:
Click
UPGRADE
to begin the upload process.
4.6.4
System Restart
The SysRestart screen allows you to restart your router with either its current
settings still in place or the factory default settings.
69
19216811.live