Page 6 / 89
Scroll up to view Page 1 - 5
6
B
egin by
fi
nding a good place to set up your router/access point.
Some things to
consider:
• You’ll need to be able to plug your internet connection into it, so it should go within
reach of the LAN cable from your DSL or Cable modem.
You’ll also want a power outlet
nearby.
• Keep the access point as central in your work area as possible.
Signal strength and
speed fall off with distance.
• Higher is often better.
For instance, set it up on the top shelf of a bookcase rather than
the bottom one, if possible.
Basic Setup
Downloaded from
www.Manualslib.com
manuals search engine
Page 7 / 89
7
M
ake note of the AirStation’s
wired MAC address
.
The LAN
or Wired MAC address is the default SSID (wireless network
name) of the AirStation. You can find it on the bottom of the
AirStation.
You may also wish to contact your ISP to ask if other information, such as global IP
address, subnet mask address, default gateway address, DNS server address, or PPPoE
parameters, is necessary to access your internet connection.
Write down any necessary
information that your ISP requires for connection.
Buffalo recommends using a wired network connection, where your computer is
physically connected to the AirStation with a CAT5 straight cable plugged into one of the
four LAN ports, to initially set up your router.
This type of setup will eliminate possible
setup problems with the wireless adapter on the computer being used to con
fi
gure the
AirStation.
The computer used to con
fi
gure the AirStation should be set to obtain an IP address
automatically using a DHCP server.
The WZR-G300N has a default LAN IP address of
192.168.11.1 and Subnet Mask of 255.255.255.0.
Getting Ready
Downloaded from
www.Manualslib.com
manuals search engine
Page 8 / 89
8
1.
Power down the Cable or DSL modem and the computer which will be used to
con
fi
gure the AirStation router.
2.
Plug the Cable or DSL’s LAN Ethernet cable into the AirStation’s WAN port.
Initially,
you may need to unplug this cable from your computer, hub or other router.
3.
Plug the provided Ethernet cable into a LAN port on the AirStation and plug the other
end into your computer’s Ethernet adapter (NIC).
If you plan to initially con
fi
gure the
AirStation wirelessly (not recommended), you may skip this step.
4.
Power on your cable or DSL modem and wait one full minute, then power on the
AirStation router and wait one full minute, and
fi
nally power on the computer which
will be used to con
fi
gure the AirStation.
If the red DIAG light on the AirStation is lit or
fl
ashing after several minutes of being powered on, please consult Buffalo Technology
Technical Support.
Connecting your AirStation
Downloaded from
www.Manualslib.com
manuals search engine
Page 9 / 89
9
L
aunch a web browser on the computer that you’re
going to use to con
fi
gure the AirStation.
Enter
192.168.11.1
into the URL
fi
eld.
Naturally, if you
change your AirStation’s IP address, you’ll have to enter
the new address instead.
A window will open, prompting you to enter a User ID
and Password.
Enter
root
as the User name and leave the password
fi
eld
blank
.
Log in to the Configuration Tool
Downloaded from
www.Manualslib.com
manuals search engine
Page 10 / 89
10
Y
our AirStation’s SmartRouter technology will determine the type of internet
connection you have automatically, and ask you for any needed information.
If
your ISP assigns IPs automatically (most cable providers do), their DHCP server
will give your router an IP address.
If additional login information is required
to connect to the internet, the wizard will ask for it.
Enter any required login
Detecting Your Broadband Connection
information if asked.
Contact your DSL
provider for any missing login information.
If your DSL provider requires that PPPoE
information be entered manually, see page
25.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live