Page 11 / 48
Scroll up to view Page 6 - 10
11
You can get back to the Setup page from
anywhere in the configuration screens by
clicking on the
Setup
tab in the top left
corner. From here, you can rerun the
Internet Connection Wizard, change your
wireless SSID and channel, and choose
your encryption type under Basic Settings.
The
Wireless
section shows your SSID and
encryption settings.
Basic Setup Page
You can also configure
port mapping
for your internet games, configure your
Firewall
, update your AirStation’s firmware, and reset your AirStation to factory
settings. As you explore the configuration tool, you’ll see that context sensitive
help is available on the right side of each page.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 48
1±
The menus in the Configuration Tool let you change your AirStation’s settings. To
navigate settings, choose a
category
at the top of the page and then a
submenu
below. Settings will appear on the left, help files on the right. This example
shows the Internet/LAN category with the DHCP submenu item selected.
Navigating the Menus
Category
Tabs
Individual
Settings
Submenus
Help and
Instructions
The following pages show examples of some screens from the configuration utility.
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 48
1²
The Initialize/Restart page can be
reached by choosing the
Admin Config
catagory tab and then clicking on the
Initialize/Restart
submenu.
Click
Restart Now
from this page to
restart your AirStation. Click
Initialize
Now
to restore your AirStation to
factory defaults and restart it.
You may also initialize your AirStation
by holding down the
Reset
button for
3 seconds.
Initialize/Reboot
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 48
1³
You can get to this page by selecting the
Wireless Config
category and choosing the
AOSS
submenu.
The blue AOSS button at the top left of the
page has the same function as the physical
AOSS button on the top of the router: it
initiates the AOSS process.
If all your clients support AOSS, it’s very
simple to set them up. Press the AOSS
AOSS
button on the router, or the one on this page, and then push the AOSS button on the client
device.
Each client device will have to be set up seperately. Wait for each AOSS process to finish
before starting the next one.
You can also activate AOSS by pushing the button on the top of your AirStation (see page
15). Consult your client device’s documentation for the location of its AOSS button.
If you’ve used AOSS to configure some wireless clients, and now want to add other wireless
clients that don’t support AOSS to your network, this screen will give you the information
you need to connect them manually.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 48
1´
AOSS
AOSS
(AirStation One-Touch Secure System) is a simple system for
configuring your wireless network securely.
If your router and your
client device are installed and both support AOSS, then making a
secure wireless connection between them is very easy.
standalone
client device
PC card
Client Manager
Software
AOSS
Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS
light will begin to flash amber.
You now have two minutes to push the AOSS button on
your client device and finish the connection.
If you have a
standalone client device
,
it will probably have a little red button
labled “AOSS” on it.
Push the button!
About 15 seconds later, you’ll have a
secure network connection.
If
your
client
device
is
a
PC
card,
CardBus,
or
PCI
adaptor,
the
AOSS
button
will
probably
be
in
its
Client
Manager Software
.
Check your client
device’s user manual for instructions
on where to push or click the AOSS
button.
After you’ve pressed both buttons, it will take about 15 seconds for the connection to
complete.
When it’s finished, the AOSS light witll glow a solid amber.
You now have a
secure network connection!
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live