Page 51 / 121 Scroll up to view Page 46 - 50
WBMR-G54 Wireless ADSL Router User Guide
SCR
Sustainable Cell Rate – The SCR is defined for the VBR service category.
This is the rate that can be sustained for “bursty”, on-off traffic sources. It
is a function of Maximum Burst Size (MBS) and the time interval (between
cells).
CDVT
Cell Delay Variation Tolerance – CDVT is a measure of the cell clumping
phenomenon by which cells are delayed in the network and are
clumped together and arrive at a system at a faster rate than negotiated.
Increasing the CDVT creates greater bucket depth.
MBS
Maximum Burst Size – The MBS is the maximum number of bytes that can
be sent continuously from the source to the destination dropping any
packets. Some ATM providers set the MBS and CDVT very low and adjust
up if problems occur.
41
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 121
WBMR-G54 Wireless ADSL Router User Guide
ATM VC Settings
ATM VC settings can be configured for all connection types in the WAN configuration window of the
Home
directory.
ATM VC Settings in WAN Settings window
The table below describes the ATM VC settings used to configure a PPPoE or PPPoA connection for an ADSL account.
ATM VC Parameters
Description
PVC
The Router supports using up to eight multiple virtual connections. This
window allows the user to configure WAN settings for all the available
connections (see instructions below on how to set up Multiple Virtual
Connections). Use the PVC drop-down menu to select the connection (Pvc0
to Pvc7) you want to configure. Since most users will use only a single
connection, the default setting
Pvc0
can be used for any changes made to
the WAN settings.
VPI
The Virtual Path Identifier is used with the VCI to define a dedicated circuit
on the ATM network portion of the connection to the Internet and WAN.
Most users will not need to change this setting.
VCI
The Virtual Channel Identifier is used with the VPI to define a dedicated
circuit on the ATM network portion of the connection to the Internet and
WAN. Most users will not need to change this setting.
Virtual Circuit
As with the PVC setting, this is mainly for use by clients who are configuring
the Router for multiple virtual connections. Use this to enable or disable the
PVC you are currently configuring. By default, the Pvc0 is
Enabled
and the
remaining PVCs are disabled.
42
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 121
WBMR-G54 Wireless ADSL Router User Guide
LAN
You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default
settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is
the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP
must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will
change automatically if you change the IP address of the Router. See the next section for information on DHCP setup.
To access the
Management IP
window, click the
LAN
button in the
Home
directory.
Management IP window
To change the LAN
IP Address
or
Subnet Mask
, type in the desired values and click the
Apply
button. Your web
browser should automatically be redirected to the new IP address. You will asked to login again to the Router’s web
manager.
43
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 121
WBMR-G54 Wireless ADSL Router User Guide
DHCP
The DHCP server is enabled by default for the Router’s Ethernet LAN interface. DHCP service will supply IP settings
to workstations configured to automatically obtain IP settings that are connected to the Router though the Ethernet port.
When the Router is used for DHCP it becomes the default gateway for DHCP client connected to it. Keep in mind that
if you change the IP address of the Router the range of IP addresses in the pool used for DHCP on the LAN will also be
changed. The IP address pool can be up to 253 IP addresses.
44
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 121
WBMR-G54 Wireless ADSL Router User Guide
DHCP Settings window
45
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top