1. Home
    2. /
  2. Manuals
    3. /
  3. Buffalo
    4. /
  4. DD-WRT-v24SP2-MULTI
    5. /
  5. 14
Page 66 / 171 Scroll up to view Page 61 - 65
Chapter 4
Configuration
WZR-HP-AG300H User Manual
31
Parameter
Meaning
LAN Config
Click this button to display the configuration screen to open ports
for games and applications.
NAS
Click this button to display the configuration screen for NAS
settings.
Admin Config
Click this button to display the configuration screen for
administration settings.
Diagnostic
Click this button to display the status of the AirStation.
Easy Setup
Enables you to easily configure the AirStation’s network settings
automatically.
MODE Information
This indicates the operation mode of the AirStation.
Internet Information
Displays WAN-side system information for the AirStation.
Check Connection
Click this button to check if the AirStation is connected to the
Internet properly.
Refresh
Click this button to refresh the current screen.
WIRELESS
Displays the current wireless settings.
AOSS Setup
Click this button to display the AOSS configuration screen.
WPS Setup
Click this button to display the WPS configuration screen.
ECO Mode
This indicates the operating status of ECO Mode.
Network Service List
Displays the list of the network devices for which information is
provided from the network on the LAN-side.
Media Server
Displays the status of the media server.
Download List
Displays the list of BitTorrent files downloading.
Language
Enables you to select the language you use.
Logout
Log out of the configuration interface. If the AirStation does not
communicate for 5 minutes, it will log out automatically.
Page 67 / 171
WZR-HP-AG300H User Manual
32
Chapter 4
Configuration
Internet/LAN (LAN Config)
Internet (Router Mode only)
Configure the WAN-side port (“Internet port”).
Parameter
Meaning
Method of Acquiring IP Address
Specify how the WAN-side IP address is obtained.
Default Gateway
Configure an IP address for the default gateway.
Address of DNS Name Server
Specify an IP address for the DNS server.
Internet MAC Address
Configure the Internet side MAC address.
Note: Configuring an improper MAC address may make the AirStation
unusable. Change this setting at your own risk.
MTU size of Internet Port
Configure the MTU value of the Internet port.
Values of 578 to 1500
bytes may be entered.
Page 68 / 171
Chapter 4
Configuration
WZR-HP-AG300H User Manual
33
PPPoE (Router Mode only)
Configure PPPoE settings.
Parameter
Meaning
Default PPPoE Connection
If you have registered multiple connection destinations in the
PPPoE Connection List, connection destinations selected here
have priority. You need to configure the route to which PPPoE is
connected to if you don’t use the default settings.
IP Unnumbered PPPoE Connection
Select the destination from the PPPoE Connection List which is
used when “Use IP Unnumbered” is chosen for the Method of
Acquiring IP Address (page 32).
PPPoE Connection List
Edit PPPoE destination. You can register up to 5 sessions.
[Edit Connection List]
Click this button to edit destination settings.
Page 69 / 171
WZR-HP-AG300H User Manual
34
Chapter 4
Configuration
Parameter
Meaning
PPPoE Connection No.*-Add
This is displayed when [Edit Connection List] is clicked.
Name of Connection
Enter the name to identify the connected destination. You may
enter up to 32 alphanumerical characters and symbols.
Username
Enter the username specified by your ISP for PPPoE certification.
You may enter up to 32 alphanumerical characters and symbols.
Password
Enter the password specified by your ISP for PPPoE certification.
You may enter up to 32 alphanumerical characters and symbols.
Service Name
Fill in this field only if your ISP specifies a Service Name. Leave
blank otherwise. You may enter up to 32 alphanumerical
characters and symbols.
Connection Type
Specifies the timing for the AirStation to connect to your
provider.
Automatic disconnection
Set time to disconnect after communication is stopped when the
connection method is set to [Connect on Demand] or [Manual].
You can enter up to 1440 minutes.
Authorization
Configure an authorization method with a provider.
MTU Size
Configure the MTU size for PPPoE.
Values of 578 to 1500 bytes
may be entered.
MRU Size
Configure MRU (Maximum Receive Unit) for PPPoE.
Values of
578
to 1492 may be entered.
Page 70 / 171
Chapter 4
Configuration
WZR-HP-AG300H User Manual
35
Parameter
Meaning
PPPoE Connection No. *-Add
Keep Alive
If Keep Alive is enabled, then the AirStation will issue an LCP
echo request once a minute in order to maintain the connection
with the PPPoE. If the server does not respond for more than
6 minutes, the line is recognized as disconnected and the
AirStation will terminate the connection. [Disabled] is the
recommended setting.
Preferred Connections
Displays information you have set regarding to the connection
destination route.
[Edit Preferred Connections]
Click to edit the connection destination route settings.
Preferred PPPoE Connection -Add
Click [Edit Preferred Connections] to display.
Name
The destination to connect by PPPoE if [Destination address] and
[Source address] match. Select the destination registered to the
PPPoE Connection List.
Destination address
When communicating to this address, the AirStation will
communicate with [Name of Connection.]
Source address
When communicating from this address, the AirStation will
communicate with [Name of Connection.]

Rate

4 / 5 based on 1 vote.

Popular Buffalo Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top