19216811.liveGENERAL FEATURES
19
MY HOME
GUIDE
CONTROL
WEB Server
MHSERVER2
This device can control and supervise a My Home
system installed in the home or office, by means of
a Personal Computer connected to a local network
or to the Internet or via the MY HOME WEB service
(with a PC connected to the Internet, an hand-held
computer, a fixed-line or a mobile phone) and can
directly interface with a 2 wire video door entry
system.
GENERAL FEATURES
The Web Server can be connected to the control PC
by modem and/or local data network or Internet.
Using a Personal Computer with commercial browser
(e.g. Internet Explorer
®
, Netscape, Opera), the
user can connect locally or remotely with the Web
Server and, by means of Web pages which can
be personalised with icon menus and command
pushbuttons, perform the following operations:
- supervise and/or command the Automation
(management of loads, lights, shutters, etc.) and
Energy Management systems;
- supervise the Burglar-alarm system by receiving
status messages (alarm on the system or no alarm
signals);
- activate the cameras in the video door entry
system to view
the picture taken in black and
white or colour, being able to alter the picture
quality, the shot and the zoom.
- display of the pictures and listening to the audio
messages sent to the Web Server from the 2 wire
audio entrance panel when the “Video door entry
answering machine” function is active.
The audio messages and the pictures can also be
sent via e-mail to an electronic mail address which
can be configured with the TiServer program. One
can also receive an e-mail message with picture
attachments, in the mailbox, to signal that events
have occurred in the burglar-alarm system (intrusion
alarm, technical alarm, etc.).
If the MY HOME WEB service is activated the
notifications are also given by sending SMS and voice
calls.
As an alternative to the Web pages, as an alternative
to the Web pages, with the aid of the MHVISUAL
programme, it is possible to control lights and
automation, monitor the Burglar alarm system,
control cameras and manage/force the load status
of the energy management. With programmes
such as Virtual Switch, SCS Action, SCS Action Server
and Visual SCS programs installed on a Personal
Computer, the Web Server can supervise and control
the Automation system (actuations ON/OFF to
command lights and/or rolling shutters up/down) by
means of icons.