1. Home
    2. /
  2. Manuals
    3. /
  3. Binatone
    4. /
  4. WR1500N2
    5. /
  5. 11
Page 51 / 73 Scroll up to view Page 46 - 50
WR1500N
150Mbps Wireless N Router
4.11 Bandwidth Control
You can configure the Bandwidth control function on this page shown in Figure 4-40:
Figure 4-40
Bandwidth Control
Enable IP QoS -
Enable or disable the function of IP QoS.
Choose BandWidth Type -
Select the network connection type from the drop-down list.
Bandwidth Apply -
The bandwidth you get. If you are not clear about that, please contact
with your ISP for help.
IP Range -
IP range of this entry.
Mode -
There are two types of mode: Minimum Bandwidth Guarantee and Maximum
Bandwidth Limit.
Bandwidth -
The bandwidth you supply to this entry.
Description -
The description for this entry.
Click
Enable
to enable this entry.
Click the
Clear
button to clear a single entry.
Click the
Clear All
button to clear all entries.
Click the
Save
button to save all configurations.
Note:
1.
The conversion relation of bandwidth: 1Mbps = 1024Kbps.
2.
Please choose the Network Connection Type and set the bandwidth according to your
Network. If you are not clear about that, please contact with your ISP for help.
3.
If no IP QoS item is enabled, the Bandwidth Apply won't be effective.
4.
IP address range for different entries could not have intersection with each other.
5.
After the configurations, click the
Save
button for the change to take effect.
4.12 IP& MAC Binding
Figure 4-41
the IP & MAC Binding menu
- 45 -
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 73
WR1500N
150Mbps Wireless N Router
There are two submenus under the IP &MAC Binding menu (shown in Figure 4-41):
Binding
Setting
and
ARP List
. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.12.1 Binding Settings
This page displays the
IP & MAC Binding Setting
table; you can operate it in accord with your
desire as shown in Figure 4-42.
Figure 4-42
Binding Settings
MAC Address
-
The MAC address of the controlled computer in the LAN.
IP Address -
The assigned IP address of the controlled computer in the LAN.
Bind
-
Check this option to enable ARP binding for a specific device.
Modify
-
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New…
button
or
Modify
button, and then you will go to the next page. This page is used for adding or modifying
an IP & MAC Binding entry, shown in Figure 4-43.
Figure 4-43
IP & MAC Binding Settings
To add IP & MAC Binding entries, follow the steps below.
1.
Click the
Add New...
button as shown in Figure 4-42.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1.
Find the desired entry in the table.
2.
Click
Modify
or
Delete
as desired on the
Modify
column.
To find an existing entry, follow the steps below.
1.
Click the
Find
button as shown in Figure 4-42.
2.
Enter the MAC Address or IP Address.
3.
Click the
Find
button in the page as shown in Figure 4-44.
- 46 -
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 73
WR1500N
150Mbps Wireless N Router
Figure 4-44
Find IP & MAC Binding Entry
Click the
Enable All
button to make all entries enabled.
Click the
Delete All
button to delete all entries.
4.12.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could configure the items on
the ARP list also. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries as shown in Figure 4-45.
Figure 4-45
ARP List
MAC Address
-
The MAC address of the controlled computer in the LAN.
IP Address
-
The assigned IP address of the controlled computer in the LAN.
Status
-
Indicates whether or not the MAC and IP addresses are bound.
Configure
-
Load or delete an item.
Load
-
Load the item to the IP & MAC Binding list.
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
- 47 -
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 73
WR1500N
150Mbps Wireless N Router
4.13 Dynamic DNS
Choose menu “
Dynamic DNS
”, you can configure the Dynamic DNS function.
The Router offers the
DDNS
(Dynamic Domain Name System) feature, which allows the hosting of
a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a
dynamic IP address, and then your friends can connect to your server by entering your domain
name no matter what your IP address is. Before using this feature, you need to sign up for DDNS
service providers such as
www.dyndns.org
, or
www.no-ip.com
. The Dynamic DNS client service
provider will give you a password or key.
4.13.1 Dyndns.org DDNS
If the dynamic DNS
Service Provider
your select is
www.dyndns.org
, the page will appear as
shown in Figure 4-46.
Figure 4-46
Dyndns.org DDNS Settings
To set up for DDNS, follow these instructions:
1.
Type the
User Name
for your DDNS account.
2.
Type the
Password
for your DDNS account.
3.
Type the
Domain Name
you received from dynamic DNS service provider here.
4.
Click the
Login
button to log in to the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to logout of the DDNS service.
- 48 -
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 73
WR1500N
150Mbps Wireless N Router
4.13.2 Oray.net DDNS
If your selected dynamic DNS
Service Provider
is www.oray.net, the page will appear as shown
in Figure 4-47.
Figure 4-47
Oray.net DDNS Settings
To set up for DDNS, follow these instructions:
1.
Type the
User Name
for your DDNS account.
2.
Type the
Password
for your DDNS account.
3.
Click the
Login
button to login the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Domain Name -
The domain names are displayed here.
Click
Logout
to logout the DDNS service.
4.13.3 Comexe.cn DDNS
If your selected dynamic DNS
Service Provider
is www.comexe.cn, the page will appear as
shown in Figure 4-48:
- 49 -
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Popular Binatone Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top