Billion 5200S Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Billion 5200S router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 9
BiPAC 5200
Series
(802.11g) ADSL2+ Firewall Router
Quick Start Guide
Page 2 / 9
Billion BiPAC 5200
Series ADSL2+ Firewall Router
PLEASE READ THE QUICK START GUIDE AND FOLLOW THE
STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU
INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE.
IF YOU NEED MORE INFORMATION ON THIS SOFTWARE
CONFIGURATION, PLEASE REFER TO THE USER’S MANUAL ON
THE CD-ROM.
Package Contents
BiPAC 5200
Series ADSL2+ Router
CD containing the on-line manual
RJ-11 ADSL/telephone cable
Ethernet (CAT-5 LAN) cable
AC-DC power adapter (12VDC, 1A): for 5200 / 5200
R3 / 5200G
AC-AC power adapter (12V AC, 1A): for 5200S / 5200S
R2
/ 5200S
R3
/ 5200G
R2
/
5200G
R3
/ 5200G
R4
/ 5200G
R5
This Quick Start Guide
Splitter/ Micro-filter (Option)
z
Do not use the router in high humidity or high temperatures.
z
Do not use the same power source for the router as other
equipment.
z
Do not open or repair the case yourself. If the router is too hot,
turn off the power immediately and have it repaired at a qualified
service center.
z
Avoid using this product and all accessories outdoors.
Warning
z
Place the router on a stable surface.
z
Only use the power adapter that comes with the package. Using a
different voltage rating power adaptor may damage the router.
Attention
1
Page 3 / 9
Quick Start Guide
Hardware Overview
BiPAC 5200G/ 5200G
R2
/ 5200G
R3
/ 5200G
R4
/ 5200G
R5
The Front LEDs
2
Lit when power is ON
Lit when connected to
an Ethernet device
Lit when successfully
connected to an ADSL
DSLAM
connection.
Lit steady when there
is a PPPoA / PPPoE
connection
Lit green when the
wireless connection
is established
Lit when the
system is ready
The Rear Ports
Connect the
detachable antenna
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/telephone
network
Connect your
computer to a LAN
port, using the
included Ethernet
Connect the supplied
power adapter to this
jack
Press it to reset
the device or
restore to factory
default settings
Power
ON/OFF
switch
Page 4 / 9
Billion BiPAC 5200
Series ADSL2+ Firewall Router
BiPAC 5200/ 5200
R3
The Front LEDs
3
Lit when the
system is ready
Lit when power is ON
Lit when connected
to an Ethernet
device
Lit when successfully
connected to an ADSL
DSLAM
connection.
Lit steady when
there is a PPPoA
/ PPPoE
The Rear Ports
Connect the
supplied power
adapter to this
jack
Connect your
computer to a LAN
port, using the
included Ethernet
cable
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/telephone
network
Press it to reset
the device or
restore to factory
default settings
Page 5 / 9
Quick Start Guide
BiPAC 5200S/ 5200S
R2
/ 5200S
R3
The Front LEDs
4
Lit when
power is ON
Lit when
connected to an
Ethernet device
Lit steady when
there is a PPPoA
/ PPPoE
Lit when the
system is ready
Lit when successfully
connected to an ADSL
DSLAM connection.
The Rear Ports
Attention: BiPAC 5200S has not supported the ON/OFF switch
19216811.live