Page 26 / 146
Scroll up to view Page 21 - 25
Chapter 4: Configuration
22
Wireless Association Table (Wireless Router Only)
IP Address:
It is IP address of wireless client that joins this network.
MAC:
The MAC address of wireless client
.
Page 27 / 146
Chapter 4: Configuration
23
Routing Table
Routing Table
Valid:
It indicates a successful routing status.
Destination:
The IP address of the destination network.
Netmask:
The destination netmask address.
Gateway/Interface:
The IP address of the gateway or existing interface that this route will use.
Cost:
The number of hops counted as the cost of the route.
RIP Routing Table
Destination:
The IP address of the destination network.
Netmask:
The destination netmask address.
Gateway:
The IP address of the gateway that this route will use.
Cost:
The number of hops counted as the cost of the route.
Page 28 / 146
Chapter 4: Configuration
24
DHCP Table
Leased:
The DHCP assigned IP addresses information.
IP Address:
A list of IP addresses of devices on your LAN (Local Area Network).
Expired:
The expired IP addresses information.
Permanent:
The fixed host mapping information
Leased Table
IP Address:
The IP address that assigned to client.
MAC Address:
The MAC address of client.
Client Host Name:
The Host Name (Computer Name) of client.
Expiry:
The current lease time of client.
Expired Table
Please refer the
Leased Table
.
Permanent Table
Name:
The name you assigned to the Permanent configuration.
IP Address:
The fixed IP address for the specify client.
MAC Address:
The MAC Address that you want to assign the fixed IP address
Maximum Lease Time:
The maximum lease time interval you allow to clients
Page 29 / 146
Chapter 4: Configuration
25
PPTP Status (VPN Router Only)
This shows details of your configured PPTP VPN Connections.
Name:
The name you assigned to the particular PPTP connection in your VPN configuration.
Type:
The type of connection (dial-in/dial-out).
Enable:
Whether the connection is currently enabled.
Active:
Whether the connection is currently active.
Tunnel Connected:
Whether the VPN Tunnel is currently connected.
Call Connected:
If the Call for this VPN entry is currently connected.
Encryption:
The encryption type used for this VPN connection.
Page 30 / 146
Chapter 4: Configuration
26
IPSec Status (VPN Router Only)
This shows details of your configured IPSec VPN Connections.
Name:
The name you assigned to the particular VPN entry.
Active:
Whether the VPN Connection is currently Active.
Connection State:
Whether the VPN is Connected or Disconnected.
Statistics:
Statistics for this VPN Connection.
Local Subnet:
The local IP Address or Subnet used.
Remote Subnet:
The Subnet of the remote site.
Remote Gateway:
The Remote Gateway IP address.
SA:
The Security Association for this VPN entry.
19216811.live