Page 76 / 78 Scroll up to view Page 71 - 75
RTA04N User
s Manual
Ed.0.1
Page 76 of 78
OAM Loopback allows you to verify the connectivity between VP/VC endpoints, as well as segment
endpoints within the VP/VC. ATM uses two cell flows: F4 used in VPs and F5 used in VCs.
Figure 4-61
Flow type:
The ATM OAM flow type. The selection can be F5 Segment, F5 End-to-End, F4
Segment or F4 End-to-End.
VPI:
The VPI number you want to do the loopback diagnostics.
VCI:
The VCI number you want to do the loopback diagnostics.
4.6.6.4. ADSL Diagnostic
Choose “
Maintenance→Diagnostic→ADSL Diagnostic
”, you will see the next screen (shown in
Figure 4-62). ADSL diagnostics allows you to diagnostics the ADSL tone.
Page 77 / 78
RTA04N User
s Manual
Ed.0.1
Page 77 of 78
Figure 4-62
Click the
Start
button to start the diagnostic, and then wait several minutes later you will see the test
result.
4.6.6.5. Diag-Test
C
hoose “
Maintenance→Diagnostic→Diag
-Test
”,
you can select an interface to run diagnostic in
Figure 4-63.
The Diagnostic Test allows you to test your DSL connection of the physical layer and protocol layer
for both LAN and WAN sides.
Figure 4-63
Page 78 / 78
RTA04N User
s Manual
Ed.0.1
Page 78 of 78
Click the
Run Diagnostic Test
button to start the test, and then wait several times later you can see
the diagnostic result.
Appendix A: Specifications
General
Standards and Protocols
ANSI T1.413, ITU G.992.1, ITU G.992.2, ITU G.992.3, ITU G.992.5,
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE
802.3u, TCP/IP, PPPoA, PPPoE, SNTP, HTTP, DHCP, ICMP, NAT
Safety & Emission
FCC, CE
Ports
Four 10/100M Auto-Negotiation RJ45 ports
Auto MDI/MDIX)
One RJ11 port
LEDs
Power, ADSL, Internet, WLAN, 1,2,3,4(LAN), WPS
Network Medium
10Base-T:
UTP category 3, 4, 5 cable
100Base-TX: UTP category-5
Max line length: 6.5Km
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps
With Annex M enabled
System Requirement
Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later
Win 9x/ ME/ 2000/ XP/ Vista/Windows 7
Physical and Environment
Working Temperature
0
~ 40
Working Humidity
10% ~ 90% RH (non-condensing)
Storage Temperature
-40
~ 70
Storage Humidity
5% ~ 90% RH (non-condensing)

Rate

4.3 / 5 based on 3 votes.

Popular Baytec Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top