Page 6 / 16
Scroll up to view Page 1 - 5
5
ADSL2+ Router
If you have a PSTN telephone line (normal analog line)
connected the
router as shown below: (Annex-A ADSL2+ Router)
**Use the “ATF085A1R” Annex-A Splitter (Optional)
1.
Connect the supplied RJ45 Ethernet cable from your PC's Ethernet
port to ADSL2+ Router's “LAN” Port.
2.
Connect the supplied RJ11 telephone cable from your home's
telephone jack to the “LINE” port of the supplied ATF085A1R splitter.
Connect the other supplied RJ11 telephone cable to the “MODEM”
port of the splitter and connect the other end of this cable to the “LINE”
port of your ADSL2+ Router.
3.
Connect a RJ11 telephone cable to the “PHONE” port of the splitter
and connect the other end to your telephone.
4.
Connect the power adapter to the power inlet (PWR) of the ADSL2+
Router and turn the power switch (SW) of your ADSL2+ Router on.
Page 7 / 16
ComTW263R4
6
ADSL2+ Router
LED Meaning
Your ADSL2+ Router has indicator lights on the front side. Please see below
for an explanation of the function of each indicator light.
1 Ethernet Port model
●
Power
: Power indicator
●
ADSL ACT
: ADSL Active indicator
●
ADSL LINK
: ADSL Link indicator
●
10M ACT
: Ethernet 10M speed active indicator
●
100M ACT
: Ethernet 100M speed active indicator
Table 1.1-- 1 Ethernet Port LED function
Label
Color
On
Flash
Off
PWR
Yellow
Power On
NA
Power Off
ADSL
ACT
Green
NA
ADSL Active
ADSL IDLE
ADSL
LINK
Green
Connect to
DSLAM
Disconnect to
DSLAM
NA
10M
ACT
Green
10M
Connected
Transmit /
Receive Data
10M
Disconnected
100M
ACT
Green
100M
Connected
Transmit /
Receive Data
100M
Disconnected
Page 8 / 16
7
ADSL2+ Router
4 Ethernet Ports model:
●
Power
: Power indicator
●
ADSL ACT
: ADSL Active indicator
●
ADSL LINK
: ADSL Link indicator
●
LAN 1~4
: Ethernet 10/100M speed active indicator
Table 1.2-- 4 Ethernet Ports LED function
Label
Color
On
Flash
Off
PWR
Yellow
Power On
NA
Power Off
ADSL
ACT
Green
NA
ADSL Active
ADSL IDLE
ADSL
LINK
Green
Connect to
DSLAM
Disconnect to
DSLAM
NA
LAN
1~4
Green
Ethernet
Connected
Transmit /
Receive Data
Ethernet
Disconnected
Page 9 / 16
ComTW263R4
8
ADSL2+ Router
Configuration Procedures
Before starting the ADSL2+ Router configuration, please kindly configure the
PC computer as below, to have automatic IP address / DNS Server.
For Windows 98SE/ME/2000/XP
1.
Click on "
Start
” -> “
Control Panel
” (in Classic View).In the Control
Panel, double click on "
Network Connections
" to continue.
2.
Single RIGHT click on “
Local Area connection
", then click
"
Properties
".
Page 10 / 16
9
ADSL2+ Router
3.
Double click on "
Internet Protocol (TCP/IP)
".
4.
Check "
Obtain an IP address automatically
” and “
Obtain DNS
server address automatically
” then click on "
OK
" to continue.
5.
Click "
Show icon in notification area when connected
" (see screen
image in 3. above) then Click on "
OK
" to complete the setup
procedures.
19216811.live