Page 11 / 66
Scroll up to view Page 6 - 10
Installation
10
WiFi
WiFi On
WiFi Off
Roaming
Roaming
Not
Roaming
VoIP Status
Registered
Not
Registered
Ethernet
Connected
No
Connection
The Signal Strength icon indicates the relative strength of the radio signal
from the nearest base station.
The
Radio Access Network icon indicates the subscriber’s network
mobile technology. It may vary from user to user and from region to
region.
The SMS icon indicates whether the mobile subscriber has received new
messages from the Short Messaging Service.
The WiFi icon indicates whether the WiFi feature is enabled or disabled.
The Roaming icon indicates whether the SIM is in roaming status or not.
The VoIP status icon indicates VOIP settings are able to register to a
VOIP server.
The Ethernet icon indicates if a PC is connected to the LAN port or if a
router is connected to the WAN port.
Page 12 / 66
Installation
11
Other Device Information
Upon inserting a SIM card, the router begins to search for a signal from
the network provider. If the signals from the network provider can not be
reached,
No Service
is displayed. If the router is connected to radio
access network, then the network provider name, type of radio access
technology and signal strength are displayed.
If the router can not read the inserted SIM card,
Read SIM Fail
is
displayed on the screen. Try removing and re-inserting the SIM card. If
the problem persists, contact your network service provider to replace the
SIM card.
If the supported SIM card is locked to a specific ISP,
Invalid SIM
is
displayed when the Mobile Country Code (MCC) or Mobile Network Code
(MNC) does not match
When a VOIP Call is initiated or received, the screen updates to provide
information such as Incoming or Outgoing call indication, phone number,
and call connection indicator (once the current call is connected).
Enabling WPS
Wi-Fi Protected Setup (WPS) is a standard designed for easy setup and
Searching
Page 13 / 66
Installation
12
automatic configuration of secure Wi-Fi networks between two WPS
supported devices. If your wireless adapter supports WPS, the WPS
feature can be a user-friendly and simple process to get your Wi-Fi
network up and running.
1. Enable WiFi.
2. Press and hold the WPS button for at least 5 seconds.
WPS
connecting
is displayed.
3. Confirm the WPS option on your wireless adapter trying to connect
to the device.
New device connected
is displayed. If you do not
confirm the WPS connection within 2 minutes,
No Device found
is
displayed and you must begin the process again.
When WPS is enabled, the screen automatically reverts to the Main
Screen after a period of inactivity when WPS is enabled.
Notifications
If the firmware version on the device is being updated via the Web
interface, the screen informs the user of the process.
If the user has enabled the PIN security protection on the SIM card, the
screen directs the user to access
4G LTE > PIN Verification
via the web
interface before proceeding to use the Internet connectivity features of
Page 14 / 66
Installation
13
the device.
Screen Saver Mode
The screen automatically enters Screen Saver Mode after 60 seconds of
inactivity. The Date and Time are displayed moving randomly on the
screen. Short pressing the WPS key or any router state changes such as
incoming VoIP call, LAN disconnect, etc. will bring the router out of
Screen Saver Mode.
PIN enabled
Act via Web
Page 15 / 66
Wizard Setup
14
Wizard Setup
User can set preferred settings step by step via the Wizard.
User can select the preferred language and then set the Wizard via Basic
Setting> Network Setting > Basic Wi-Fi Network.
19216811.live