Page 11 / 65 Scroll up to view Page 6 - 10
Wizard Setup
10
Page 12 / 65
Internet Setup
11
Internet Setup
Basic Setting
Connection Type
The Router can link to the internet via 3.5G HSPA or Ethernet. Select the
connection type you prefer.
3.5G HSPA Setting
Get Latest APN Database
Get the latest Profile Name, Number, User Name, Password, and APN
from the web site automatically.
Roaming Connection
To allow roaming network connection, select
Enabled
. To block roaming
connection, select
Disabled
.
Page 13 / 65
Internet Setup
12
.
Note:
Charges for roaming connection may be high. Contact
your mobile network operator for more information.
APN Setting
The APN (Access Point Name) is provided by your mobile network
operator. You can choose to set the APN automatically or manually. In
most cases, the Router works properly when the APN is set to Auto.
To set the APN manually, contact your mobile network operator for the
APN, User Name and Password of the data service.
Authentication Type Setting
To allow user to set PAP (Password Authentication Protocol) or CHAP
(Challenge Handshake Authentication Protocol).
Connection
On Demand:
You can set the idle time for the 3.5G HSPA connection.
When the Router is idle, the connection will be disconnected
automatically after the idle time expires.
Keep Alive:
The connection is always kept on. If the HSPA connection is
disconnected, the Router tries to reconnect.
Ethernet Setting
Automatic Configuration - DHCP
Choose
Dynamic IP Address
to obtain IP Address information
automatically from your ISP. Select this option if your ISP does not give
you any IP numbers to use. This option is commonly used for cable
modem services.
Page 14 / 65
Internet Setup
13
Static IP
Select
Static IP
if all WAN IP information is provided to you by your ISP.
You will need to enter the IP address, subnet mask, gateway address,
and DNS address(es) provided to you by your ISP.
PPPoE
Choose
PPPoE
(Point to Point Protocol over Ethernet) if your ISP uses a
PPPoE connection. Your ISP will provide you with a username and
password. This option is typically used for DSL services.
Service Name:
Enter the ISP Service Name (optional).
Connect on Demand:
Enter a maximum idle time during which the
Internet connection is maintained during inactivity.
Keep Alive:
If you select this option, the Router will periodically check
your Internet connection. If you are disconnected, then the Router
automatically tries to re-establish your connection. To use this option,
select Keep Alive. In the Redial Period field, specify how often you want
the Router to check the Internet connection.
Page 15 / 65
Internet Setup
14
PPTP
Choose
PPTP
(Point-to-Point-Tunneling Protocol) if your ISP uses a
PPTP connection. Your ISP will provide you with a username and
password.
Internet IP Address:
Enter the IP address
Subnet Mask:
This is the Router’s Subnet Mask, as seen by users on the
Internet (including your ISP). Your ISP will provide you with the Subnet
Mask.
Server IP Address:
Enter the Server IP provided by your ISP (optional).
L2TP
Choose
L2TP
(Layer 2 Tunneling Protocol) if your ISP uses a L2TP
connection. Your ISP will provide you with a username and password.
Internet IP Address:
Enter the IP address provided by your ISP.
Connect on Demand:
Enter a maximum idle time during which the
Internet connection is maintained during inactivity.
Keep Alive:
Redial Period If you select this option, the Router will
periodically check your Internet connection. If you are disconnected, the
Router automatically tries to re-establish your connection. To use this
option, select
Keep Alive
. In the
Redial Period
field, you specify how
often you want the Router to check the Internet connection.

Rate

3.5 / 5 based on 2 votes.

Popular Bandluxe Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top