Page 56 / 65 Scroll up to view Page 51 - 55
Appendix A: FAQ
55
Q: My PIN code is enabled and where can I input the PIN code to use my
Router?
A:
Enter GUI > 3.5G HSPA > PIN Verification and input your PIN Code.
Q: Why does my SIM status display “No Device” or “SIM Error”, what can
I do?
A:
You can check the SIM card is inserted correctly in your router.
Q: Where can I change the password of Router?
A:
Enter GUI > Admin > Management
Q: Can I backup all my settings of Router?
A:
Enter GUI > Admin > Recover & Renewal, Select “Backup
Configuration”.
Q: How to use the Reset button on the Router?
A:
1. Short press the Reset can restart the Router.
2. Long press the Reset for more than 5 sec can reset the Router to
factory default.
Q: Where can I reset Router to factory default?
A:
1. Long press the Reset button on the Router for more than 5 sec.
2. Enter GUI > Admin > Recover & Renewal, Select “Restore Factory
Defaults”.
Page 57 / 65
Appendix A: FAQ
56
Q: If I remove the SIM when 3G is connected, why can’t I see the SIM
status change?
A:
You have to restart the router to see the status.
Page 58 / 65
Appendix B: Specification
57
Appendix B: Specification
Form Factor
Weight (g)
170g
Interface
LAN port
RJ45, 1 port
WAN port
RJ45, 1 port, can be configured to be 2
nd
LAN port
Power supply plug
Yes
Reset button
Yes
SIM slot
Yes, Push-push type
Connectivity and Data Speed
UMTS Band
By built-in module
HSPA/WCDMA Data
Rate
Uplink up to 5.7 Mbps
Downlink up to R300 Series: 21/ 28.8 Mbps
R200 Series: 7.2 Mbps
WCDMA power class
Power Class 3
WLAN
802.11b/g with Pre-n 2.4 GHz band
LAN
Ethernet 10/100 Mbps
Antenna
GSM/WCDMA Main
Antenna
Embedded
WCDMA RX Diversity
Antenna
Embedded
3G External Antenna
Port
Yes
WiFi Antenna
Embedded
Page 59 / 65
Appendix B: Specification
58
Protocol
Default connection
"3.5G HSPA First" or "Ethernet First" customizable
Automatic WAN
connection fail-over
Supported
WME Traffic
Prioritization / Traffic
Shaping
Supported
Fixed WAN
connection
DHCP, Static IP, PPPoE, PPTP, L2TP
UMTS/HSPA
connection
Connection On Demand, Keep Alive, Auto APN matching
with USIM
Security
Multiple VPN passthrough (IPsec, PPTP, L2TP), Internet
access restriction, Firewall, DoS Prevention, Traffic and
Event Logging
NAT-NAPT
Port forwarding, Port triggering, DMZ,Multicast
Pass-Through, Static Routing, Dynamic Routing (RIP 1,
RIP2), QoS
DNS
DNS Agent, DDNS
ALG Support
Yahoo messenger, AOL messenger, MSN messenger, ICQ,
RealAudio, NetMeeting, Telnet, FTP, Microsoft Traceroute,
Quake, IRC, Microsoft PPTP Client
Browser-based Admin
GUI
Setup Wizard in GUI.
Browser supported: IE, Firefox, Safari
Browser-based Admin
GUI Multi-Language
Supported
English, Traditional Chinese,
Other Features
IPv4, TCP, UDP, ICMPv4, ARP, DHCP Server/Client,
HTTPs, NTP, TFTP server, MAC Clone
Wireless LAN
802.11b data rate
1/2/5.5/11 Mbps, Auto or Fixed Rate
802.11g data rate
6/9/12/18/24/36/48/54 Mbps, Auto or Fixed Rate
802.11n data rate
65Mbps/135Mbps (No MIMO)
Security
WPA2/WPA/AES/TKIP, WPA/WPA2 PSK mode, 802.1x
(identify all EAP types supported), 64/128 bits WEP
Encryption, MAC address filtering, open system and shared
key authentication, SSID Broadcast Disable
Other Features
Support up to 32 simultaneous wireless users, WME
Status Indication
Page 60 / 65
Appendix B: Specification
59
LED
LED location from top to bottom:
UMTS, Roaming, WLAN, Ethernet, DIAG and Power.
UMTS, Roaming, WLAN, Ethernet, DIAG LED will be
multiplexed for signal strength when 3G button short
pushed
Accessories
Power adaptor
Supported, Input 100~240V AC, 50~60GHz
Output 12V DC, 1A (targeted)
Power Consumption
Voltage
12V DC
Data mode
4.0V Peak: 2.5A, Average: 1A / 1.5V average: 0.5A
Environment
Operation
Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
-20°C to 60°C (-4°F to 140°F)
Operating Humidity
10% to 80% Non-Condensing
Storage Humidity
5% to 90% Non-Condensing
Conformance
FCC
RoHS

Rate

3.5 / 5 based on 2 votes.

Popular Bandluxe Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top