Page 51 / 60
Scroll up to view Page 46 - 50
45
Restore Default
To restore your router to its factory default settings, click the Restore button.
When prompted, click OK.
Page 52 / 60
46
Save/Reboot
This feature allows the router to enable new network configuration to take effect
or to clear problems with the router’s network connection.
Page 53 / 60
47
Internet Time
Enable Internet Time to automatically synchronize your modem’s time with a
time-server when connected to the Internet.
Page 54 / 60
48
Troubleshooting
System Log
If the log mode is enabled, the system will begin to log all the selected events.
For the Log Level, all events above or equal to the selected level will be logged.
For the Display Level, all logged events above or equal to the selected level will
be displayed. If the selected mode is ‘Remote’ or ‘Both,’ events will be sent
to the specified IP address and UDP port of the remote syslog server. If the
selected mode is ‘Local’ or ‘Both,’ events will be recorded in the local memory.
Select the desired values and click ‘Save/Apply’ to configure the system log
options.
Page 55 / 60
49
Diagnostics
Your modem is capable of testing your DSL connection. The individual tests are
listed below. If a test displays a fail status, click “Rerun Diagnostic Tests” at
the bottom of this page to make sure the fail status is consistent. If the test
continues to fail, click “Help” and follow the troubleshooting procedures.
19216811.live