Atlantis-Land WebShare-111 Router Manual PDF (Setup & Configuration Guide)

Page 26 / 89 Scroll up to view Page 21 - 25

WebShare 111/141

A02-RA111 / A02-RA141

Pag. 17

3.

In the

LAN Area Connection Status

window, click

Properties

.

4.

Select

Internet Protocol (TCP/IP)

and click

Properties

.

5.

Select the

Obtain an IP address automatically

and the

Obtain DNS server

address automatically

radio buttons.

6.

Click

“OK”

to finish the configuration.

Page 27 / 89

WebShare 111/141

A02-RA111 / A02-RA141

Pag. 18

3.1.5 Configuring for MAC

1.

Click on Apple Menu and

select

Control

Panel/TCP/IP

. It will appear

the follow screen.

2.

Select

Ethernet

on

Connect

Via

.

3.

Select

Using DHCP Server

on

Configure

.

4.

Leave empty the field

DHCP

Client ID

.

Page 28 / 89

WebShare 111/141

A02-RA111 / A02-RA141

Pag. 19

3.1.6 Verification of Configuration

To verify your correct configuration (after PC restart, necessary for Windows 98,

98Se, ME and instead enough obtain IP lease for XP, 2000),use ping command.

From a DOS Window, type:

ping 192.168.1.254

.

If It show you this message:

Pinging 192.168.1.254 with 32 bytes of data:

Reply from 192.168.1.254: bytes=32 times<10ms TTL=64

It i s possibile to continue to follow step. If it show you follow message:

Pinging 192.168.1.254 with 32 bytes of data:

Request timed out.

Check that LAN LED is lit (change CAT cable if is not). Check PC IP Address

typing

winipcfg

for (Win95,98,ME) or

ipconfig

(for Win2000,XP) and eventually

re-install TCP/IP stack.

3.1.7 Browser Configuration

Now open IE, go to

Instruments

menu, select the

Connections

tab and select

one of the following options:

•

Never use remote connection

•

Use remote connection if another network connection isn’t available

Page 29 / 89

WebShare 111/141

A02-RA111 / A02-RA141

Pag. 20

3.2 Factory Default Setting

Before configuring your, you need to know the following default settings:

±

Username:

admin

±

Password:

atlantis

±

IP Address (

192.168.1.254

)

±

Subnet Mask (

255.255.255.0

)

±

ISP Setting in WAN Side =

PPPoA, VCMux, Routing, VPI=8, VCI=35

±

DHCP Server enabled

with IP pool from

192.168.1.100

to

192.168.1.199

3.2.1 Password

The default username and password are

admin

and

atlantis

respectively.

If you ever forget the password to log in, you may press the RESET

button up to 6 seconds to restore the factory default settings.

Page 30 / 89

WebShare 111/141

A02-RA111 / A02-RA141

Pag. 21

3.2.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory.

The default

values are shown below.

Porta LAN

Porta WAN

IP address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP addresses for

distribution to PCs

100 IP addresses

continuing from

192.168.1.100 through

192.168.1.199

Mode=

Routing

Encapsulation=

PPPoA

Multiplex=

VC

VPI=

8

VCI=

35

3.3 Reset of WebShare Router ADSL2+

If you forget the password, you can restore router with Default Factory Setting

using

“

Reset

” button in the rear of the product. To do this operation is necessary

be sure that led SYS is lit, then press “

Reset

” button for 10 seconds. The LED

SYS will turn off and it will blink; it will be lit when firmware with Factory Default

Setting will be loaded. Now you can enter on WebShare Router ADSL2+ with

password “

atlantis

”.

3.4 Informations from the ISP

Before configuring this device, you have to check with your ISP (Internet Service

Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, or

IPoA.

Gather the information as illustrated in the following table and keep it for

reference.

PPPoE

VPI/VCI,

VC-based/LLC-based

multiplexing,

Username,

Password, Service Name, and Domain Name System (DNS)

IP address (it can be automatically assigned by your ISP when

you connect or be set manually).

PPPoA

VPI/VCI,

VC-based/LLC-based

multiplexing,

Username,

Password, and Domain Name System (DNS) IP address (it

can be automatically assigned by your ISP when you connect

or be set manually).

RFC1483

Bridged

VPI/VCI, VC-based/LLC-based multiplexing to use Bridged

Mode.

RFC1483

Routed

VPI/VCI, VC-based/LLC-based multiplexing, IP address,

Subnet mask, Gateway address, and Domain Name System

(DNS) IP address (it is fixed IP address).

Rate

Popular Atlantis-Land Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share