2. Login Name:

admin

; Password:

admin

. Click

Login

to

enter the webisite home page again.

2.8

Setting up the Message Board

You can create your own Blog site by setting up the Message Board to share you stories to your friend.

1. Click

Login

at the lower left corner.

3.

Click the Message Board tab and click

New topic

.

4.

Input the subject for discussion and click

Add

.

5. When finished, click

Add Message

to enter the subject and

leave a message.

6.

Input your information to the fields and write your message in

the Message box. Click

Submit

to send out the message.

7. Your message board is ready.

1. Enter the Web configuration page of WL-700gE and click

Advanced Settings

at the upper right corner. Then click

IP

Conig -> Miscellaneous

in the left side menu. Select

Yes

radio

button to enable DDNS client and select a DDNS server.

2.

If you do not have a DDNS account, you can apply for a free trial

account at DynDNS.org. Click

Free Trial

to open the registration

page of DynDNS.org.

Due to website update, the registration steps and screens

here below may be different from the actual website.

3. After you click Free Trail, you are directed to registration

page of DynDNS. Check the two checkboxes as shown in

the picture below.

4. Scroll down and enter the

Username

you want to use for your

account, such as “account”. Enter your

E-mail address

to receive

the confirmation letter from DynDNS. Enter the

Password

for

your account. Then press

Create Account

button.

2.9

Setting up DDNS

For static IP users who need to make a host or server available to Internet users, they need to have a static IP

address and register a domain name for easy memory. However, dynamic IP user cannot map their address to DNS

server because their IP addresses keep changing. To solve this problem, WL-700gE provides Dynamic DNS (DDNS)

function. DDNS enables dynamic IP users to map the domain name to dynamic IP address by a registered account.

To realize this function, you must first register at DDNS service provider, such as DynDNS.org.

5. After pressing

Create Account

you can see a message

telling you that a confirmation letter has been sent to your

e-mail address.

Open your mail box to check the mail.

6.

Check your mail box for the confirmation letter, open the mail

and click the link to re-enter the DynDNS registration page

and activate your account.

7. Click Login.

8.

Input username and password to login.

9.

After logging in, you can see this welcome message.

10. Select Services tab.

11. Click

Add Dynamic DNS Host

.

12. Enter the host name then click

Add Host

.

13. Your hostname is successfully created.

14. Return to WL-700gE DDNS configuration page. Enable

DDNS Client, set “Server” to

WWW.DYNDNS.ORG

and input

your user name, password and host name to the fields. Click

Apply

to activate the settings.

15. To test whether DDNS functions or not, ping the domain

name to see whether your host is accessible. Click

Start

->

Run...

-> type

cmd

, and enter the command line interface.

16. Type ping account.dyndns.org and press Enter. If you

get reply from a certain IP address, it means your host is

accessible from Internet.