Page 31 / 51
Scroll up to view Page 26 - 30
²1
Chapter 5: Installing the utilities
WL-5±0GU
EZSetup
Notes
:
•
When running EZSetup, the Internet connection pauses briefly then reestablishes the
connection.
•
If the EZSetup button is pushed without running the EZSetup Wizard, the PWR
indicator flashes and Internet connection pauses briefly and then reestablishes the
connection.
Note
:
Use the EZSetup utility with one wireless client at a time. If the wireless client cannot
discover the wireless router while inEZSetup mode, shorten the distance between the client and
the wireless router.
±.
Push the EZSetup button at the back panel of the wireless router.
3.
On the EZSetup Wizard, click
Next
to continue.
Page 32 / 51
²±
WL-5±0GU
Chapter 5: Installing the utilities
4.
Assign a name to your network, then click
Next
.
5.
Use the auto-generated passphrase as your network’s security key or manually
assign a passphrase containing between 8 and ³² characters. Click
Next
.
Page 33 / 51
²²
Chapter 5: Installing the utilities
WL-5±0GU
³. Installation is completed. Click
Save or print settings
for future reference or
Save settings to a USB flash drive
to add other devices to the network. Click
Next
to connect to the Internet.
Note
: For more details on adding devices to the network using a USB flash drive, refer to the
section
Adding network devices using a USB flash drive
on the next page.
7.
You have connected to the wireless router. If you want to configure the Internet
settings, click
Setup
. Click
Finish
to close the EZSetup Wizard.
Page 34 / 51
²4
WL-5±0GU
Chapter 5: Installing the utilities
Adding network devices using a USB flash drive
With the EZSetup utility, you can add devices to your network using a USB flash
drive.
To add network devices using a USB flash drive:
1.
In the EZSetup Wizard, click
Save settings to a USB flash drive
.
2.
Plug a USB flash drive into a USB port on your computer, and then select the
drive from the dropdown list. When done, click
Next
to continue.
Page 35 / 51
²5
Chapter 5: Installing the utilities
WL-5±0GU
3.
Remove the USB flash drive from this computer, and then plug to the computer
that you want to add to the wireless network.
4. Locate the
SetupWireless.exe
from the USB drive, and double-click to run it.
Click
Yes
to add this computer to the wireless network.
5. Click
OK
to exit the
Wireless Network Setup Wizard
.
19216811.live