ASUS RT-N66W Router Manual PDF (Setup & Configuration Guide)

Page 51 / 130 Scroll up to view Page 46 - 50

´1

•

WPA/WPA2 Personal/WPA Auto-Personal

: This option

provides strong security. You can use either WPA (with

TKIP) or WPA2 (with AES). If you select this option, you must

use TKIP + AES encryption and enter the WPA passphrase

(network key).

•

WPA/WPA2 Enterprise/WPA Auto-Enterprise

: This option

provides very strong security. It is with integrated EAP server

or an external RADIUS back-end authentication server.

•

Radius with 802.1x

NOTE:

Your wireless router supports the maximum transmission rate

of 54Mbps when the

Wireless Mode

is set to

Auto

and

encryption

method

is

WEP

or

TKIP

.

9. Select any of these WEP (Wired Equivalent Privacy) Encryption

options for the data transmitted over your wireless network:

•

Oﬀ

: Disables WEP encryption

•

64-bit

: Enables weak WEP encryption

•

128-bit

: Enables improved WEP encryption.

10.When done, click

Apply

.

Page 52 / 130

´±

4.1.2 WPS

WPS (Wi-Fi Protected Setup) is a wireless security standard that

allows you to easily connect devices to a wireless network. You

can conﬁgure the WPS function via the PIN code or WPS button.

NOTE

:

Ensure that the devices support WPS.

To enable WPS on your wireless network:

1. From the navigation panel, go to

Advanced Settings

>

Wireless

>

WPS

tab.

2. In the

Enable WPS

ﬁeld, move the slider to

ON

.

3. WPS uses 2.4GHz by default. If you want to change the

frequency to 5GHz, turn

OFF

the WPS function, click

Switch

Frequency

in the

Current Frequency

ﬁeld, and turn WPS

ON

again.

Page 53 / 130

´²

Note:

WPS supports authentication using Open System, WPA-Personal,

and WPA2-Personal. WPS does not support a wireless network that uses

a Shared Key, WPA-Enterprise, WPA2-Enterprise, and RADIUS encryption

method.

3. In the WPS Method ﬁeld, select

Push Button

or

Client PIN

code. If you select P

ush Button

, go to step 4. If you select

Client PIN

code, go to step 5.

4. To set up WPS using the router’s WPS button, follow these

steps:

a. Click

Start

or press the WPS button found at the rear of the

wireless router.

b. Press the WPS button on your wireless device. This is

normally identiﬁed by the WPS logo.

Note:

Check your wireless device or its user manual for the location of

the WPS button.

c. The wireless router will scan for any available WPS devices.

If the wireless router does not ﬁnd any WPS devices, it will

switch to standby mode.

5. To set up WPS using the Client’s PIN code, follow these steps:

a. Locate the WPS PIN code on your wireless device’s user

manual or on the device itself.

b. Key in the Client PIN code on the text box.

c. Click

Start

to put your wireless router into WPS survey mode.

The router’s LED indicators quickly ﬂash three times until the

WPS setup is completed.

Page 54 / 130

´³

4.1.3 Bridge

Bridge or WDS (Wireless Distribution System) allows your ASUS

wireless router to connect to another wireless access point

exclusively, preventing other wireless devices or stations to access

your ASUS wireless router. It can also be considered as a wireless

repeater where your ASUS wireless router communicates with

another access point and other wireless devices.

To set up the wireless bridge:

1. From the navigation panel, go to

Advanced Settings

>

Wireless

>

Bridge

tab.

2. Select the frequency band for the wireless bridge.

3. In the

AP Mode

ﬁeld, select any of these options:

• AP Only

: Disables the Wireless Bridge function.

• WDS Only

: Enables the Wireless Bridge feature but prevents

other wireless devices/stations from connecting to the

router.

Page 55 / 130

´´

• HYBRID

: Enables the Wireless Bridge feature and allows

other wireless devices/stations to connect to the router.

NOTE:

In Hybrid mode, wireless devices connected to the ASUS wireless

router will only receive half the connection speed of the Access Point.

4. In the

Connect to APs in list

ﬁeld, click

Yes

if you want to

connect to an Access Point listed in the Remote AP List.

5. In the

Control Channel

ﬁeld, select the operating channel

for the wireless bridge. Select

Auto

to allow the router to

automatically select the channel with the least amount of

interference.

NOTE:

Channel availability varies per country or region.

6. On the Remote AP List, key in a MAC address and click the

Add

button

to enter the MAC address of other available Access

Points.

NOTE:

Any Access Point added to the list should be on the same Control

Channel as the ASUS wireless router.

7. Click

Apply

.

Rate

Popular ASUS Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share