Page 6 / 70 Scroll up to view Page 1 - 5
6
1
Power LED
Off
: No power.
On
: Device is ready.
Flashing slow
: Rescue mode
Flashing quick
: WPS is processing.
2
LAN LED
Off
: No power or no physical connection.
On
: Has physical connection to a local area network (LAN).
3
WAN LED
Off
: No power or no physical connection.
On
: Has physical connection to a wide area network (WAN).
4
2.4GHz LED / 5GHz LED
Off
: No 2.4GHz or 5GHz signal.
On
: Wireless system is ready.
Flashing
: Transmitting or receiving data via wireless connection.
5
USB LED
Off
: No power or no physical connection.
On
: Has physical connection to USB devices.
6
Power (DC-In) port
Insert the bundled AC adapter into this port and connect your router to a power source.
7
Power button
Press this button to power on or off the stystem.
8
USB 2.0 ports
Insert USB 2.0 devices such as USB hard disks or USB flash drives into these ports.
Insert your iPad’s USB cable into one of these ports to charge your iPad.
9
Reset button
This button resets or restores the system to its factory default settings.
10
WAN (Internet) port
Connect a network cable into this port to establish WAN connection.
11
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
12
WPS button
This button launches the WPS Wizard.
On
Off
Page 7 / 70
7
NOTES:
• Use only the adapter that came with your package. Using
other adapters may damage the device.
Specifications:
DC Power adapter
DC Input
: +19V with max 1.58A current;
+12V with max 2A current
Operating
Temperature
0~40
o
C
Storage
0~70
o
C
Operating Humidity
50~90%
Storage
20~90%
Page 8 / 70
8
2
Creating your network
Positioning your router
For the best wireless signal transmission between the wireless
router and the network devices connected to it, ensure that you:
Place the wireless router in a centralized area for a maximum
wireless coverage for the network devices.
Keep the device away from metal obstructions and away from
direct sunlight.
Keep the device away from 802.11g or 20MHz only Wi-Fi
devices, 2.4GHz computer peripherals, Bluetooth devices,
cordless phones, transformers, heavy-duty motors, fluorescent
lights, microwave ovens, refrigerators, and other industrial
equipment to prevent signal interference or loss.
Always update to the latest firmware. Visit the ASUS website at
to get the latest firmware updates.
To ensure the best wireless signal, orient the three detachable
antennas as shown in the drawing below.
For optimum performance, please switch on the cooling
system.
45°
45°
90°
Page 9 / 70
9
What you need
To set up your network, you need one or two computers that meet
the following system requirements:
Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX/
1000BaseTX)
IEEE 802.11a/b/g/n wireless capability
An installed TCP/IP service
Web browser such as Internet Explorer, Firefox, Safari, or
Google Chrome
NOTES:
• If your computer does not have built-in wireless capabilities,
you may install an IEEE 802.11a/b/g/n WLAN adapter to your
computer to connect to the network.
• With its dual band technology, your wireless router supports
2.4GHz and 5GHz wireless signals simultaneously. This allows
you to do Internet-related activities such as Internet surfing or
reading/writing e-mail messages using the 2.4GHz band while
simultaneously streaming high-definition audio/video files
such as movies or music using the 5GHz band.
• If you are using only one computer with single band
IEEE 802.11b/g/n WLAN adapter, you will only be able to use
the 2.4GHz band.
• If you are using only one computer with dual band
IEEE 802.11a/b/g/n WLAN adapter, you will be able to use the
2.4GHz or 5GHz band.
• If you are using two computers with both
IEEE 802.11a/b/g/n WLAN adapters, you will be able to use
both 2.4GHz and 5GHz bands simultaneously.
• The Ethernet RJ-45 cables that will be used to connect the
network devices should not exceed 100 meters.
Page 10 / 70
10
Setting up your wireless router
Wired connection
IMPORTANT!
• Use wired connection in setting up your wireless router to
avoid possible setup problems due to wireless uncertainty.
• Before setting up your ASUS wireless router, do the following:
If you are replacing an existing router, disconnect it from
your network.
Disconnect the cables/wires from your existing modem
setup. If your modem has a backup battery, remove it as
well.
• Reboot your computer (recommended).
NOTE:
Your wireless router has an integrated auto-crossover
function, so use either straight-through or crossover cable for
wired connection.
RT-N66U
Computer
Modem
LAN
Power
Wa l Power Outlet
Power
WAN
1
2
3
4
To set up your wireless router via wired connection:
1.
Insert your wireless router’s AC adapter to the DC-In port and
plug it to a power outlet.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top