Page 36 / 68
Scroll up to view Page 31 - 35
36
Configuring the Advanced settings
Advanced Setting allows you to configure the advanced features
of your wireless router.
Setting up the DHCP Server
You may enable the
DHCP Server
function in your wireless router
so your network clients can automatically obtain IP addresses
from your wireless router.
NOTE
:
The ASUS Wireless Router can support up to 253 IP
addresses for your network.
To set up the DHCP server:
1. Click
Advanced Setting
from the navigation menu at the left
side of your screen.
2. Under the
LAN
menu, click
DHCP Server
.
Page 37 / 68
37
3. In the
Enable the DHCP Server?
field, tick
Yes
.
4. In the
IP Pool Starting Address
field, key in the starting IP
address.
5. In the
IP Pool Ending Address
field, key in the ending IP
address.
6. In the
Lease Time
field, key in the time that the IP addresses
expire and the wireless router automatically assigns new IP
Addresses for the network clients.
IMPORTANT
!
• For the IP Pool Starting and Ending IP addresses, we
recommend that you use:
•
IP address
: 192.168.1.xxx (xxx can be any number between
2 and 254)
• IP Pool Starting Address should not be greater than the IP
Pool Ending Address.
Page 38 / 68
38
To upgrade the firmware:
1. Click
Advanced Setting
from the navigation menu at the left
side of your screen.
2. Under the
Administration
menu, click
Firmware Upgrade
.
3. In the
New Firmware File
field, click
Browse
to locate the new
firmware in your computer.
4. Click
Upload
.The uploading process takes about three
minutes.
Upgrading the firmware
NOTE
:
Download the latest firmware from the ASUS website
at
NOTE
:
If the upgrade process fails, the wireless router
automatically enters the rescue mode and the power LED
indicator at the front panel flashes slowly.To recover or restore
the system, use the Firmware Restoration utility.
Page 39 / 68
39
Restoring/Saving/Uploading settings
To restore/save/upload the settings:
1. Click
Advanced Setting
from the navigation menu at the left
side of your screen.
2. Under the Administration menu, click Restore/Save/Upload
Setting.
3. Select the tasks that you want to do:
•
To restore to the default factory settings, click
Restore
, and
click
OK
in the confirmation message.
•
To save the current system settings, click
Save
, and click
Save
in the file download window to save the system file in
your preferred path.
•
To restore previous system settings, click
Browse
to locate
the system file that you want to restore, then click
Upload
.
Page 40 / 68
40
Setting up your network printer
Use the Network Printer Setup utility to set up a USB printer on
your wireless router and allow network clients to access the USB
printer.
NOTES
:
• To check if your USB printer is compatible with your ASUS
wireless router, refer to the Plug-n-Share Disk Support List at
• The wireless router's printer server function is not supported
on Windows
®
2000.
To set up your USB Printer:
1. Click
USB Application
>
Network Printer Server
.
2. Click
Download Now!
in the ASUS EZ printer sharing mode to
download the network printer utility.
19216811.live