Page 21 / 58
Scroll up to view Page 16 - 20
±1
Chapter 3: Configuring the clients
RT-N12
4. Select the
Gateway
tab, and key in
New gateway
then click
Add
.
5. Select the
DNS configuration
tab
and click
Enable DNS
. Key in
Host
,
Domain
, and
DNS Server Search
Order
, then click
Add
.
³. Click
OK
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 58
±±
RT-N12
Chapter 3: Configuring the clients
Windows
®
NT4.0
1. Go to
Control Panel
>
Network
to
display the Network setup window
then select the
Protocols
tab.
±. Select
TCP/IP Protocol
from the
Network Protocols list then click
Properties
.
².
From the IP Address tab of the
Microsoft TCP/IP Properties
window, you can:
•
Select the type of network
adapter installed in your
system.
•
Set the router to assign IP
address automatically.
•
Manually set up the IP address,
subnet mask, and default
gateway.
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 58
±²
Chapter 3: Configuring the clients
RT-N12
4. Select the
DNS
tab then click
Add
under the
DNS Service Search
Order
and key in DNS.
Windows
®
2000
1. Click
Start
>
Control Panel
>
Network and Dial-up Connection
.
Right-click
Local Area Connection
then click
Properties
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 58
±4
RT-N12
Chapter 3: Configuring the clients
±. Select
Internet Protocol (TCP/IP)
,
then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address
: and
key in
IP address
,
Subnet mask
,
and
Default gateway
.
4. Select
Obtain DNS server
address automatically
if you
want the DNS server settings to be
assigned automatically. Otherwise,
select
Use the following DNS
server addresses
: and key in the
Preferred
and
Alternate DNS
server
.
5. Click
OK
when done.
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 58
±5
Chapter 3: Configuring the clients
RT-N12
±. Select
Internet Protocol (TCP/IP)
,
then click
Properties
.
². Select
Obtain an IP address
automatically
if you want
the IP settings to be assigned
automatically. Otherwise, select
Use the following IP address
: and
key in
IP address
,
Subnet mask
,
and
Default gateway
.
4. Select
Obtain DNS server
address automatically
if you
want the DNS server settings to be
assigned automatically. Otherwise,
select
Use the following DNS
server addresses
: and key in the
Preferred and Alternate DNS
server
.
5. Click
OK
when done.
Windows
®
XP
1. Click
Start
>
Control Panel
>
Network Connection
. Right-click
Local Area Connection
then select
Properties.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live