1. Home
    2. /
  2. Manuals
    3. /
  3. ASUS
    4. /
  4. RT-AC66U
    5. /
  5. 14
Page 66 / 131 Scroll up to view Page 61 - 65
µµ
2. On the
Enable static routes
field, choose
Yes
.
3. On the
Static Route List
, enter the network information of
other access points or nodes. Click the
Add
or
Delete
button to add or remove a device on the list.
4. Click
Apply
.
4.2.4 IPTV
The wireless router supports connection to IPTV services through
an ISP or a LAN. The IPTV tab provides the configuration settings
needed to set up IPTV, VoIP, multicasting, and UDP for your
service. Contact your ISP for specific information regarding your
service.
Page 67 / 131
µ¶
4.3
WAN
4.3.1 Internet Connection
The Internet Connection screen allows you to configure the
settings of various WAN connection types.
To configure the WAN connection settings:
1. From the navigation panel, go to
Advanced Settings
>
WAN
>
Internet Connection
tab.
2. From the
WAN Connection Type
dropdown list, select any of
these Internet connection types:
Automatic IP
,
PPPoE
,
PPTP
,
L2TP
, and
Fixed IP
.
NOTE
:
For details about your Internet connection type, refer to the
information on next pages.
3. Follow the default settings in
Basic Config
and
WAN DNS
Setting
.
4. ISPs may require additional log-in information to connect to
the Internet. Contact your ISP if you require this information.
5. The host name identifies your router to the ISP. Input the host
name provided by your ISP.
Page 68 / 131
µ·
WAN Connection Type
: Choose your Internet Service
Provider type. The choices are
Automatic IP
,
PPPoE
,
PPTP
,
L2TP
or
fixed IP
. Consult your ISP if the router is unable
to obtain a valid IP address or if you are unsure the WAN
connection type.
Enable WAN
: Select
Yes
to allow the router Internet access.
Select
No
to disable Internet access.
E
nable NAT
: NAT (Network Address Translation) is a system
where one public IP (WAN IP) is used to provide Internet
access to network clients with a private IP address in a LAN.
The private IP address of each network client is saved in a NAT
table and is used to route incoming data packets.
Enable UPnP
: UPnP (Universal Plug and Play) allows several
devices (such as routers, televisions, stereo systems, game
consoles, and cellular phone), to be controlled via an IP-based
network with or without a central control through a gateway.
UPnP connects PCs of all form factors, providing a seamless
network for remote configuration and data transfer. Using
UPnP, a new network device is discovered automatically.
Once connected to the network, devices can be remotely
configured to support P2P applications, interactive gaming,
video conferencing, and web or proxy servers. Unlike Port
forwarding, which involves manually configuring port
settings, UPnP automatically configures the router to accept
incoming connections and direct requests to a specific PC on
the local network.
Connect to DNS Server
: Allows this router to get the DNS
IP address from the ISP automatically. A DNS is a host on
the Internet that translates Internet names to numeric IP
addresses.
Authentication
: This item may be specified by some ISPs.
•
•
•
•
•
•
Page 69 / 131
µ¸
Check with your ISP and fill them in if required.
Host Name
: This field allows you to provide a host name for
your router. It is usually a special requirement from your ISP.
If your ISP assigned a host name to your computer, enter the
host name here.
MAC Address
: MAC (Media Access Control) address is a
unique identifier for your networking device. Some ISPs
monitor the MAC address of networking devices that connect
to their service and reject any unrecognized device that
attempt to connect. To avoid connection issues due to an
unregistered MAC address, you can:
• Contact your ISP and update the MAC address associated
with your ISP service.
•
Clone or change the MAC address of the ASUS wireless router
to match the MAC address of the previous networking device
recognized by the ISP.
•
•
Page 70 / 131
¶0
4.3.2 Port Trigger
Port range triggering opens a predetermined incoming port for a
limited period of time whenever a client on the local area network
makes an outgoing connection to a specified port. Port triggering
is used in the following scenarios:
More than one local client needs port forwarding for the
same application at a different time.
An application requires specific incoming ports that are
different from the outgoing ports.
•
•
To set up Port Trigger:
1. From the navigation panel, go to
Advanced Settings
>
WAN
>
Port Trigger
tab.
2. On Enable Port Trigger, choose
Yes
.
3. If the online task or application is on the
Well-Known
Applications List
, select it from the list.
4. On the Trigger Port List section, enter a description, the trigger
ports, and protocol. Click the
Add
button.
5. Click
Apply
.

Rate

4.5 / 5 based on 2 votes.

Popular ASUS Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top