Page 61 / 129 Scroll up to view Page 56 - 60
61
3. In the
Domain Name
text box, enter a domain name for the
wireless router.
4. In the
IP Pool Starting Address
field, key in the starting IP
address.
5. In the
IP Pool Ending Address
field, key in the ending IP
address.
6. In the
Lease Time
field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP
server will then assign a new IP address.
NOTES:
We recommend that you use an IP address format of 192.168.1.xxx
(where xxx can be any number between 2 and 254) when specifying
an IP address range.
An IP Pool Starting Address should not be greater than the IP Pool
Ending Address.
7. In the
DNS and Server Settings
section, key in your DNS
Server and WINS Server IP address if needed.
8. Your wireless router can also manually assign IP addresses to
devices on the network. On the
Enable Manual Assignment
field, choose
Yes
to assign an IP address to specific MAC
addresses on the network. Up to 32 MAC Addresses can be
added to the DHCP list for manual assignment.
Page 62 / 129
62
4.2.3 Route
If your network makes use of more than one wireless router, you
can configure a routing table to share the same Internet service.
NOTE
:
We recommend that you do not change the default route
settings unless you have advanced knowledge of routing tables.
To configure the LAN Routing table:
1. From the navigation panel, go to
Advanced Settings
>
LAN
>
Route
tab.
2. On the
Enable static routes
field, choose
Yes
.
3. On the
Static Route List
, enter the network information of
other access points or nodes. Click the
Add
or
Delete
button to add or remove a device on the list.
4. Click
Apply
.
Page 63 / 129
63
4.2.4 IPTV
The wireless router supports connection to IPTV services through
an ISP or a LAN. The IPTV tab provides the configuration settings
needed to set up IPTV, VoIP, multicasting, and UDP for your
service. Contact your ISP for specific information regarding your
service.
Page 64 / 129
64
4.3
WAN
4.3.1 Internet Connection
The Internet Connection screen allows you to configure the
settings of various WAN connection types.
To configure the WAN connection settings:
1. From the navigation panel, go to
Advanced Settings
>
WAN
>
Internet Connection
tab.
2. Configure the following settings below. When done, click
Apply
.
WAN Connection Type
: Choose your Internet Service Provider
type. The choices are
Automatic IP
,
PPPoE
,
PPTP
,
L2TP
or
fixed IP
. Consult your ISP if the router is unable to obtain a
valid IP address or if you are unsure the WAN connection type.
Enable WAN
: Select
Yes
to allow the router Internet access.
Select
No
to disable Internet access.
Page 65 / 129
65
E
nable NAT
: NAT (Network Address Translation) is a system
where one public IP (WAN IP) is used to provide Internet
access to network clients with a private IP address in a LAN.
The private IP address of each network client is saved in a NAT
table and is used to route incoming data packets.
Enable UPnP
: UPnP (Universal Plug and Play) allows several
devices (such as routers, televisions, stereo systems, game
consoles, and cellular phone), to be controlled via an IP-based
network with or without a central control through a gateway.
UPnP connects PCs of all form factors, providing a seamless
network for remote configuration and data transfer. Using
UPnP, a new network device is discovered automatically.
Once connected to the network, devices can be remotely
configured to support P2P applications, interactive gaming,
video conferencing, and web or proxy servers. Unlike Port
forwarding, which involves manually configuring port
settings, UPnP automatically configures the router to accept
incoming connections and direct requests to a specific PC on
the local network.
Connect to DNS Server
: Allows this router to get the DNS
IP address from the ISP automatically. A DNS is a host on
the Internet that translates Internet names to numeric IP
addresses.
Authentication
: This item may be specified by some ISPs.
Check with your ISP and fill them in if required.
Host Name
: This field allows you to provide a host name for
your router. It is usually a special requirement from your ISP.
If your ISP assigned a host name to your computer, enter the
host name here.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top