Page 91 / 137
Scroll up to view Page 86 - 90
91
4.8
System Log
System Log contains your recorded network activities.
NOTE:
System log resets when the router is rebooted or powered off.
To view your system log:
1.
From the navigation panel, go to
Advanced Settings
>
System Log
.
2.
You can view your network activities in any of these tabs:
• General Log
• DHCP Leases
• Wireless Log
• Port Forwarding
• Routing Table
Page 92 / 137
92
5
Utilities
NOTES:
•
Download and install the wireless router's utilities from the ASUS
website:
•
Device Discovery v1.4.7.1 at
LiveUpdate/Release/Wireless/Discovery.zip
•
Firmware Restoration v1.9.0.4 at
ASUS/LiveUpdate/Release/Wireless/Rescue.zip
•
Windows Printer Utility v1.0.5.5 at
ASUS/LiveUpdate/Release/Wireless/Printer.zip
•
The utilities are not supported on MAC OS.
5.1
Device Discovery
Device Discovery is an ASUS WLAN utility that detects an ASUS
wireless router device, and allows you to configure the wireless
networking settings.
To launch the Device Discovery utility:
•
From your computer’s desktop, click
Start
>
All Programs
>
ASUS Utility
>
RT-AC3200
Wireless
Router
>
Device Discovery
.
NOTE:
When you set the router to Access Point mode, you need to use
Device Discovery to get the router’s IP address.
Page 93 / 137
93
5.2
Firmware Restoration
Firmware Restoration is used on an ASUS Wireless Router that
failed during its firmware upgrading process. It uploads the
firmware that you specify. The process takes about three to four
minutes.
IMPORTANT:
Launch the rescue mode on the router before using the
Firmware Restoration utility.
NOTE:
This feature is not supported on MAC OS.
To launch the rescue mode and use the Firmware Restoration
utility:
1.
Unplug the wireless router from the power source.
2.
Hold the Reset button at the rear panel and simultaneously
replug the wireless router into the power source. Release the
Reset button when the Power LED at the front panel flashes
slowly, which indicates that the wireless router is in the rescue
mode.
Page 94 / 137
94
3.
Set a static IP on your computer and use the following to set
up your TCP/IP settings:
IP address
: 192.168.1.x
Subnet mask
: 255.255.255.0
4.
From your computer’s desktop, click
Start
>
All Programs
>
ASUS Utility RT-AC3200 Wireless
Router
>
Firmware Restoration
.
5.
Specify a firmware file, then click
Upload
.
NOTE
:
This is not a firmware upgrade utility and cannot be used on
a working ASUS Wireless Router. Normal firmware upgrades must be
done through the web interface. Refer to
Chapter 4: Configuring the
Advanced Settings
for more details.
5.3
Setting up your printer server
5.3.1 ASUS EZ Printer Sharing
ASUS EZ Printing Sharing utility allows you to connect a USB
printer to your wireless router’s USB port and set up the print
server. This allows your network clients to print and scan files
wirelessly.
Page 95 / 137
95
NOTE:
The print server function is supported on Windows® XP,
Windows® Vista, and Windows® 7.
To set up the EZ Printer sharing mode:
1.
From the navigation panel, go to
General
>
USB Application
>
Network Printer Server
.
2.
Click
Download Now!
to download the network printer
utility.
NOTE:
Network printer utility is supported on Windows® XP, Windows®
Vista, and Windows® 7 only. To install the utility on Mac OS, select
Use
LPR protocol for sharing printer
.
3.
Unzip the downloaded file and click the Printer icon to run the
network printer setup program.
19216811.live