Page 21 / 129
Scroll up to view Page 16 - 20
21
3.1.1 Setting up the wireless security settings
To protect your wireless network from unauthorized access, you
need to configure its security settings.
To set up the wireless security settings:
1. From the navigation panel, go to
General
>
Network Map
.
2. On the Network Map screen and under
System status
, you can
configure the wireless security settings such as SSID, security
level, and encryption settings.
NOTE
: You can set up different wireless security settings for 2.4GHz and
5GHz bands.
2.4GHz security settings
5GHz security settings
3
. On the
Wireless name (SSID)
field, key in a unique name for
your wireless network.
Page 22 / 129
22
4. From the
Security Level
dropdown list, select the encryption
method for your wireless network.
IMPORTANT!
The IEEE 802.11n/ac standard prohibits using High
Throughput with WEP or WPA-TKIP as the unicast cipher. If you use these
encryption methods, your data rate will drop to IEEE 802.11g 54Mbps
connection.
5
. Key in your security passkey.
6. Click
Apply
when done.
3.1.2 Managing your network clients
To manage your network clients:
1. From the navigation panel, go to
General
>
Network Map
tab.
2
. On the Network Map screen,select the
Client Status
icon to
display your network client’s information.
3.
To block a client’s access to your network, select the client and
click
block
.
Page 23 / 129
23
3.1.3 Monitoring your USB device
The ASUS Wireless Router provides two USB ports for connecting
USB devices or USB printer to allow you to share files and printer
with clients in your network.
NOTES:
•
To use this feature, you need to plug a USB storage device, such as a
USB hard disk or USB flash drive, to the USB 3.0/2.0 ports on the rear
panel of your wireless router. Ensure that the USB storage device is
formatted and partitioned properly. Refer to the Plug-n-Share Disk
Support List at
•
The USB ports support two USB drives or one printer and one USB
drive at the same time.
Page 24 / 129
24
IMPORTANT!
You first need to create a share account and its
permission /access rights to allow other network clients to access the
USB device via an FTP site/third-party FTP client utility, Servers Center,
Samba, or AiCloud. For more details, refer to the section
3.5.Using the
USB Application
and
3.6 Using AiCloud
in this user manual.
To monitor your USB device:
1. From the navigation panel, go to
General
>
Network Map
.
2. On the Network Map screen,select the
USB Disk Status
icon to
display your USB device’s information.
3. On the AiDisk Wizard field, click
GO
to set up an FTP server for
Internet file sharing.
NOTES
:
•
For more details, refer to the section
3.5.2 Using Servers Center
in
this user manual.
•
The wireless router works with most USB HDDs/Flash disks (up to 2TB
size) and supports read-write access for FAT16, FAT32, EXT2, EXT3,
and NTFS.
Page 25 / 129
25
Safely removing the USB disk
IMPORTANT
:
Incorrect removal of the USB disk may cause data
corruption.
To safely remove the USB disk:
1. From the navigation panel, go to
General
>
Network Map
.
2. In the upper right corner, click
>
Eject USB disk
. When
the USB disk is ejected successfully, the USB status shows
Unmounted
.
19216811.live