Page 16 / 129
Scroll up to view Page 11 - 15
16
3.
If QIS failed to detect your Internet connection type, follow
the steps below to manually configure your connection
settings:
a)
Select the Annex mode that your DSL service uses.
NOTES
:
•
Annex A or Annex B mode has multiple modes: Annex A/I/J/L/M
or Annex B/J. If your ISP DSLAM offers both Annex A and Annex M
mode, QIS automatically set the Annex mode to Annex A/I/J/L/M
mode and completes the DSL line setting.
•
If you want to configure your ASUS xDSL modem router to a specific
Annex mode, refer to the section
DSL Setting
in Chapter 4 of this
user guide.
Page 17 / 129
17
b) Select your
Country
and
Internet Service Provider (ISP)
.
c)
Assign the wireless network name (SSID) and security key
for your wireless connection. Click
Apply
when done.
Page 18 / 129
18
d)
A summary page appears to show the current settings for
your network. Click
Next
to save your network settings
and go to the Network Map page.
2.3
Connecting to your wireless network
After setting up your xDSL modem router via QIS, you can connect
your computer or other smart devices to your wireless network.
To connect to your network:
1.
On your computer, click the network icon
in the
notification area to display the available wireless networks.
2.
Select the wireless network that you want to connect to, then
click
Connect
.
3.
You may need to key in the network security key for a secured
wireless network, then click
OK
.
4.
Wait while your computer establishes connection to the
wireless network successfully. The connection status is
displayed and the network icon displays the connected
status.
Page 19 / 129
19
NOTES:
•
Refer to the next chapters for more details on configuring your
wireless network's settings.
•
Refer to your device's user manual for more details on connecting it
to your wireless network.
3
Configuring the General
settings
3.1
Using the Network Map
Network Map allows you to configure your network’s security
settings, manage your network clients, and monitor your USB
device.
Page 20 / 129
20
3.1.1 Setting up the wireless security settings
To protect your wireless network from unauthorized access, you
need to configure its security settings.
To set up the wireless security settings:
1.
From the navigation panel, go to
General
>
Network Map
.
2.
On the Network Map screen and under
System status
, you
can configure the wireless security settings such as SSID,
security level, and encryption settings.
NOTE
: You can set up different wireless security settings for 2.4GHz and
5GHz bands.
3.
On the
Wireless name (SSID)
field, key in a unique name for
your wireless network.
4.
From the
Authentication Method
dropdown list, select the
encryption method for your wireless network.
2.4GHz security settings
5GHz security settings
19216811.live