Page 11 / 64
Scroll up to view Page 6 - 10
7
Web User Interface
4. Web User Interface
This chapter describes how to access the wireless cable router via Web configuration
interface. First, please connect your PC to the Ethernet port, via an Ethernet cable. Open the
for local access.
*User interfaces will eventually be updated to reflect the Ubee brand
1. Click Login. Enter
user
for User name and
user
for Password, and then click
OK.
U10C022
Page 12 / 64
8
Web User Interface
2. If the user enters an incorrect user name and/or password, the web user interface
displays 401 Unauthorized. PARENTAL CONTROL, FIREWALL and TOOLS.
W
EB
U
SER
I
NTERFACE
H
OME
P
AGE
After login, user will see the EMTA page first. The layout is divided into 3 areas. Menu
Bar, Menu Tree and Configure Area.
Menu Bar includes top level menu, like GATEWAY, WIRELESS and VPN. Once
user select the option in menu bar, Menu Tree will be changed correspondently.
To
change parameter settings, user needs to operate in Configure Area. Below chapter
is to go through page by page, to ensure that you’re clear about each feature and
how to use it.
4.1 MODEM
User can select different options to view wireless eMTA’s information and real time
status. They include Information, Status, Downstream, Upstream, Upstream Burst,
Operation Configuration, Event Log options.
U10C022
Page 13 / 64
9
Web User Interface
4.1.1 Information
This page is to show EMTA Information.
Label
Description
Cable Modem
Indicates the eMTA complies with DOCSIS specification.
MAC Address
Indicates the RF MAC address
EMTA
Indicate the DOCSIS standard it’s compliant with.
MAC address
Unique hardware address of eMTA.
Serial Number
Unique manufacture ID number of a product.
U10C022
Page 14 / 64
10
Web User Interface
Boot Code Version
Software version of device driver.
Software version
Software
Hardware Version
An internal ID number to identify hardware design.
CA Key
This is required by BPI. EMTA will install a CA Key that
transferred from your service provider’s server after eMTA is
authenticated.
4.1.2 Status
This page is to show cable modem status.
Label
Description
Item
List the item to be showed here.
Status
Status of the item.
Comments
Additional information for this item.
Acquire a Downstream
Channel
It shows a Downstream channel that eMTA is trying to lock to,
and informs the progress.
Connectivity State
After physical layer’s initialization, eMTA will be configured by a
DHCP server. Once succeeds to get an IP, that means eMTA is
online. In status column, it shows the progress. In comments
Column, it tells the reason why eMTA’s connectivity state is not
ok.
Boot state
Shows the registration status.
Security
If BPI is enabled, status will show Enabled.
MTA Provisioning State
Indicates the eMTA status.
U10C022
Page 15 / 64
11
Web User Interface
4.1.3 Downstream
This page is to Show EMTA Downstream.
Label
Description
Downstream lock
Display if the eMTA succeeded to lock to a downstream
channel.
Downstream Channel ID
Display the channel ID.
Downstream Frequency
Display the channel frequency eMTA is scanning.
Downstream Modulation
Display the modulation method that’s required for the
downstream channel locked by eMTA. This is decided by
service provider.
Downstream Symbol Rate
Display the symbol rate. Current eMTA downstream symbol
rate
(QAM64 is 5056941 sym/sec, QAM256 is 5360537
sym/sec).
Downstream Interleave
Depth
Current eMTA downstream Interleave depth
(8/16/32/64/128/other).
Downstream Receive Power
Level
Display the receiver power level after ranging process.
Downstream SNR
Display the SNR of this downstream channel.
U10C022
19216811.live