1. Home
    2. /
  2. Manuals
    3. /
  3. Alvarion
    4. /
  4. BMAX-6000 Telrad
    5. /
  5. 26
Page 126 / 138 Scroll up to view Page 121 - 125
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
DM (Device Management) Settings
104
Server ID
The OMA server authentication
user name
Server Password
Authentication password of the
OMA server
Up to 128
characters
Client ID
OMA client authentication user
name
WiMAXCPE
Up to 128
characters
Client Password
OMA client authentication
password
admin
Up to 128
characters
Model ID
The device model ID. OMA DM
client uses this ID in
communication sessions. The
server uses this ID to identify the
client.
4M-CPE6000-PRO-1D_1V
Enable Client Poll
Select this check-box to enable
OMA DM client polling
mechanism.
Enable
Enable Server Poll
Select this check-box to enable
an initial session between the
server and client.
Enable
Poll Interval
If the client polling mechanism
is enabled, the client will follow
this interval (in minutes) for
polling.
1
Poll Attempt
Enter the number of attempts
for client polling
2
WIB Try
The number of WIB (Wireless
Initial Bootstrap) re-try that the
client will try to do.
0
WIB Interval
The interval (in seconds)
between WIB actions.
180
Network Entry Delay
Time
0
Table 9-5: DM Settings - OMA
Parameter
Description
Default
Possible Values
Page 127 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
DM (Device Management) Settings
105
Server Nonce
A string used only once for the
first session until the ID and
password are set. The server
nonce is used in an OMA DM
session when a device
authenticates the server. For the
device to connect to the server,
the nonce that is stored in the
device must be the same as the
nonce that the server has.
1234
Client Nonce
1234
Client Initial Session
Click
Initial Now
to start a
contact and send a poll to the
server.
N/A
Boot Strapped
If client already has an OMA DM
profile set with the parameters
described above, this check-box
is checked automatically.
Disable
Enable/Disable
Table 9-5: DM Settings - OMA
Parameter
Description
Default
Possible Values
Page 128 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
Function Settings
106
9.7
Function Settings
In this page you reserve DSCP (Differentiated Services Code Point) markings for classification settings
and set the ISP details.
The following table describes the configurable Function Setting parameters:
Figure 9-8: Engineering - Function Settings
Table 9-6: Function Settings
Parameter
Description
Default
Possible Values
DSCP (Differentiated Services Code Point)
SIP DSCP
Session Initiation Protocol
26
0-63
RTCP DSCP
Real Time Voice Control Protocol
46
0-63
RTP DSCP
Real Time Voice
46
0-63
MGMT DSCP
Management
6
0-63
ISP (Internet Service Provider)
ISP Name
Name of the internet service provider
N/A
ISP URL
URL of the internet service provider
N/A
Page 129 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
UI Settings
107
9.8
UI Settings
This window enables controlling the User Interface of the subscriber. Selecting the features in this
window disables the accessibility and availability of features for the end-user.
The following table describes the configurable UI Setting parameters:
Figure 9-9: Engineering - UI Settings
Table 9-7: UI Settings Parameters
Parameter
Description
Comments
Setup > Basic
Operation Mode - select
this check-box to disable
the option to modify the
operation mode by the user.
Wan Mtu - select this
check-box to disable the
option to modify the WAN
Mtu by the user.
Selecting both options makes the
Setup > Basic page unavailable to
the subscriber.
See also
“Setting Basic Parameters”
on page 37
Setup > Restore To Factory
Restore To Factory - select this
check-box to disable the option
to restore parameters by the
user.
Selecting this option makes the
Setup > Restore To Factory page
unavailable to the subscriber.
Page 130 / 138
BreezeMAX PRO 6000 Product Manual
Chapter 9 - Engineering
UI Settings
108
Advanced > Authentication
Authentication - select this
check-box to disable the option
to set Authentication
parameters by the user.
See also
“Setting Advanced
Parameters” on page 49
Advanced > Security
Security - select this check-box
to disable the option to set
Security parameters by the
user.
Advanced > Dynamic DNS
Dynamic DNS - select this
check-box to disable the option
to set DDNS parameters by the
user.
Selecting this option makes the
Advanced > Dynamic DNS page
unavailable to the subscriber.
Advanced - Firewall
Firewall - select this
check-box to disable the
option to set Firewall
parameters by the user.
VPN Passthrough - select
this check-box to disable
the option to set VPN
Passthrough parameters by
the user.
See
“Firewall” on page 55
Status - Certificate
Certificate - select this
check-box to disable the option
to view and set the certificates
by the user.
Selecting this option makes the
Status > Certificate page
unavailable to the subscriber
See
“Certificate Status” on page 74
Telephony
Telephony - select this
check-box to disable the option
to view the telephony
parameters by the user.
Selecting this option makes the
Telephony menu item unavailable to
the subscriber
See
“Configuring Telephony
Parameters” on page 77
Table 9-7: UI Settings Parameters (Continued)
Parameter
Description
Comments

Rate

3.5 / 5 based on 2 votes.

Popular Alvarion Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top