1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 199
Page 991 / 998 Scroll up to view Page 986 - 990
Overview
Circuit Emulation Command Reference
10-17
iMG/RG Software Reference Manual (LAN Module Management)
10.5.1.1.13 CES SET PSPAN PEERIP
Syntax
CES SET PSPAN <pspan_port> PEERIP <ip_address>
Description
This command allows the user to specify the peer PSPAN endpoint address.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces set pspan pspan-1 peerip 10.10.10.1
10.5.1.1.14 CES SET PSPAN PEERUDP
Syntax
CES SET PSPAN <pspan_port> PEERUDP <port_number>
Description
This command allows the user to specify the peer PSPAN udp port number that all traffic
should be received from.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces set pspan pspan-1 peerudp 50003
10.5.1.1.15 CES SET PSPAN RTPENABLED
Syntax
CES SET PSPAN <pspan_port> RTPENABLED <state>
Option
Description
Default Value
pspan_port
The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
IP_address
The ip address of the device at the other end of the
pspan
-none-
Option
Description
Default Value
pspan_port
The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
Port_number
The udp port number to be used when filtering for the
incoming stream of data
-none-
Page 992 / 998
Circuit Emulation Command Reference
Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-18
Description
This command allows the user to specify whether or not rtp packets are to be used for
transmission.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces set pspan pspan-1 rtpenabled false
10.5.1.1.16 CES SHOW DEVICE
Syntax
CES SHOW DEVICE
Description
This command allows the user to display the status of the CES daughter card.
Example
ces show device
CES Device level settings
--------------------------
Port Type
DS1
Local IP Interface
ces (8.8.8.1)
10.5.1.1.17 CES LIST ALARMS
Syntax
CES LIST ALARMS
Description
This command shows all the alarms that have been raised on the CES daughter-card and
when.
Example
ces list alarms
1970/01/01 00:00:19.55: Raised Communication Failed on pspan-1
1970/01/01 00:00:24.84: Raised Loss of Signal on tdm-1
10.5.1.1.18 CES SHOW ALARMS
Syntax
CES SHOW ALARMS
Description
This command shows all the current alarms on the CES daughter-card.
Example
ces show alarms
Entity
| Raised
| Alarm Name
Option
Description
Default Value
pspan_port
The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-
state
True for sending RTP packets
true
Page 993 / 998
Overview
Circuit Emulation Command Reference
10-19
iMG/RG Software Reference Manual (LAN Module Management)
----------|------------------------|-----------------------
tdm-1
| 1970/01/01 00:00:24.84 | Loss of Signal
pspan-1
| 1970/01/01 00:00:19.55 | Communication Failed
10.5.1.1.19 CES LIST PORTS
Syntax
CES LIST PORTS
Description
This command allows the user to display the status of the both the individual
tdm ports
on the card.
Example
ces list ports
Name | Type | Disabled | Operational | Alarms
-------|------|----------|-------------|-----------
tdm-1 | DS1
| false
| down
| LOS
tdm-2 | DS1
| true
| down
| <none>
---------------------------------------------------
10.5.1.1.20 CES SHOW PORT
Syntax
CES SHOW PORT <tdm_port>
Description
This command allows the user to display the status of a particular TDM port.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces show port tdm-1
DS1 Port Attributes
------------------------------------
Name
tdm-1
Disabled
false
Operational State
down
Alarms
LOS
Timing Reference
connection
Line Encoding
b8zs
Line Build-out
00db
Loopback State
none
Receiving AIS
no
Option
Description
Default Value
Tdm_port
The Physical port on the card (TDM-1 or TDM-2)
-none-
Page 994 / 998
Circuit Emulation Command Reference
Overview
iMG/RG Software Reference Manual (LAN Module Management)
10-20
10.5.1.1.21 CES SHOW PORT COUNTERS
Syntax
CES SHOW PORT <tdm_port>
COUNTERS
Description
This command allows the user to display the counters associated with a particular TDM
Port.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces show pspan pspan-2 counters
DS1 Port Statistics
-------------------------------------------
Name
tdm-1
Line Code Violations
0
Errored Seconds
0
Severely Errored Seconds
0
LOS Seconds
124167
Unavailable Seconds
124167
10.5.1.1.22 CES RESET PORT COUNTERS
Syntax
CES RESET PORT <tdm_port>
COUNTERS
Description
This command resets the counters associated with a physical TDM interface.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces reset port tdm-1 counters
10.5.1.1.23 CES LIST PSPANS
Syntax
CES LIST PSPANS
Option
Description
Default Value
Tdm_port
The Physical port on the card (TDM-1 or TDM-2)
-none-
Option
Description
Default Value
Tdm_port
The Physical port on the card (TDM-1 or TDM-2)
-none-
Page 995 / 998
Overview
Circuit Emulation Command Reference
10-21
iMG/RG Software Reference Manual (LAN Module Management)
Description
This command allows the user to display the status of the both the individual
tdm ports
on the card.
Example
ces list pspans
Name
| Disabled | Operational | Alarms
----------|----------|-------------|-----------
pspan-1
| false
| down
| COMM
pspan-2
| true
| down
| <none>
-----------------------------------------------
10.5.1.1.24 CES SHOW PSPAN
Syntax
CES SHOW PSPAN <pspan_port>
Description
This command allows the user to display the status of a particular PSPAN.
Options
The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example
ces show pspan pspan-1
PSPAN Attributes
-----------------------------------------------------------
Name
pspan-2
Disabled
true
Operational state
down
Alarms
<none>
Encapsulation
SAToP over IPv4
Local IP Interface
ces (8.8.8.1)
Local UDP Port
60001
Peer IP Address
0.0.0.0
Peer UDP Port
60001
Bytes per packet
1023
RTP
true
Requested Jitter Buffer (+/- us) 6000
IP DiffServ code Point
46
Option
Description
Default Value
pspan_port
The network based connection associated with the
TDM port on the card (TDM-1 and PSPAN-1 or TDM-
2 and PSPAN-2)
-none-

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top