1. Home
    2. /
  2. Manuals
    3. /
  3. Allied-Telesis
    4. /
  4. AT-iMG624A
    5. /
  5. 13
Page 61 / 998 Scroll up to view Page 56 - 60
System command reference
System Management
1-29
iMG/RG Software Reference Manual (System Configuration)
ip
config
(disabled)
ip
icmp
(disabled)
ip
l2cyan
(disabled)
ip
rawip
(disabled)
ip
socket
(disabled)
ip
tcp
(disabled)
ip
udperr
(disabled)
ip
udp
(disabled)
isdn
aft
(disabled)
isdn
aftbg
(disabled)
isdn
aux00
(disabled)
isdn
iapi
(disabled)
isdn
indtol4
(disabled)
isdn
isdnmod
(disabled)
isdn
msgh
(disabled)
isdn
msgnisdn
(disabled)
isdn
ss
(disabled)
isdn
statin
(disabled)
rip
errors
(disabled)
rip
rx
(disabled)
rip
tx
(disabled)
snmp
packet
(disabled)
sshd
fatal
(ENABLED)
sshd
error
(ENABLED)
sshd
info
(disabled)
sshd
verbose
(disabled)
sshd
debug
(disabled)
sshd
debug1
(disabled)
sshd
debug2
(disabled)
sshd
debug3
(disabled)
upload
info
(disabled)
upload
preserve
(disabled)
upload
get
(disabled)
voip
aep
(disabled)
voip
ca
(disabled)
voip
dep
(disabled)
voip
gwadrv
(disabled)
voip
mep
(disabled)
voip
mgcp-event
(disabled)
voip
mgcp-msg
(disabled)
voip
mgcp-trace
(disabled)
voip
mod
(disabled)
voip
sep
(disabled)
Page 62 / 998
System Management
System command reference
iMG/RG Software Reference Manual (System Configuration)
1-30
voip
sip-event
(disabled)
voip
sip-msg
(disabled)
voip
sip-trace
(disabled)
webserver access
(disabled)
webserver file
(disabled)
Example
--> system log list voip
voip
aep
(disabled)
voip
ca
(disabled)
voip
dep
(disabled)
voip
gwadrv
(disabled)
voip
mep
(disabled)
voip
mgcp-event
(disabled)
voip
mgcp-msg
(disabled)
voip
mgcp-trace
(disabled)
voip
mod
(disabled)
voip
sep
(disabled)
voip
sip-event
(disabled)
voip
sip-msg
(disabled)
voip
sip-trace
(disabled)
See also
SYSTEM LOG
SYSTEM LOG ENABLE|DISABLE
1.1.5.1.25 SYSTEM NAME
Syntax
SYSTEM NAME [<sys-name>]
Description
This command sets the system name.
To show the current system name use the system info command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> system name AT-iMG616BD-Routed
1.1.5.1.26 SYSTEM CONTACT
Syntax
SYSTEM CONTACT [<sys-contact>]
Option
Description
Default Value
SYS
-
NAME
The name of the system.
none
Page 63 / 998
System command reference
System Management
1-31
iMG/RG Software Reference Manual (System Configuration)
Description
This command sets the system contact reported by system info command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> system contact admin@his_desk
1.1.5.1.27 SYSTEM LOCATION
Syntax
SYSTEM LOCATION [<sys-location>]
Description
This command sets the system location reported by system info command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> system location “Inter AT labs”
1.1.5.1.28 SYSTEM RESTART
Syntax
SYSTEM RESTART
Description
This command forces a warm restart on the gateway
Example
--> system restart
1.1.5.1.29 SYSTEM SET LOGIN ACCESS
Syntax
SYSTEM SET LOGIN <name> ACCESS {DEFAULT|ENGINEER|SUPERUSER}
Description
This command sets the access permissions of a user who has been added to the system
using the SYSTEM ADD LOGIN command. Only a
Super
user can use this command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Description
Default Value
SYS
-
CONTACT
Usually a reference to some contacts.
none
Option
Description
Default Value
SYS
-
LOCATION
Usually a reference to the location where the sys-
tem is installed.
none
Page 64 / 998
System Management
System command reference
iMG/RG Software Reference Manual (System Configuration)
1-32
Example
--> system set login ckearns access engineer
See also
SYSTEM SET LOGIN MAYCONFIGURE
SYSTEM SET LOGIN MAYDIALIN
For more information on the types of user access permissions, see
Section 1.1.2.1
.
1.1.5.1.30 SYSTEM SET LOGIN MAYCONFIGURE
Syntax
SYSTEM SET LOGIN <name> MAYCONFIGURE {ENABLED|DISABLED}
Description
This command sets configuration permissions for a user who has been added to the sys-
tem using the ADD SYSTEM LOGIN or the ADD SYSTEM USER command. Only a
Super user can use this command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> system set login ckearns mayconfigure disabled
See also
SYSTEM SET LOGIN ACCESS
SYSTEM SET LOGIN MAYDIALIN
1.1.5.1.31 SYSTEM SET LOGIN MAYCONFIGUREWEB
Syntax
SYSTEM SET LOGIN <name> MAYCONFIGUREWEB {ENABLED|DISABLED}
Option
Description
Default Value
N
AME
The name of an existing user.
N/A
DEFAULT/
ENGINEER/
SUPERUSER
Access permissions for a user.
Default
Option
Description
Default Value
N
AME
The name of an existing user.
N/A
ENABLED/
DISABLED
Determines whether a user can configure the system.
enabled
Page 65 / 998
System command reference
System Management
1-33
iMG/RG Software Reference Manual (System Configuration)
Description
This command sets configuration permissions for a user who has been added to the sys-
tem using the SYSTEM ADD LOGIN or the SYSTEM ADD USER command. Only a
Super user can use this command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> system set login ckearns mayconfigure disabled
See also
SYSTEM SET LOGIN ACCESS
SYSTEM SET LOGIN MAYDIALIN
1.1.5.1.32 SYSTEM SET LOGIN MAYDIALIN
Syntax
SYSTEM SET LOGIN <name> MAYDIALIN {ENABLED|DISABLED}
Description
This command sets dial in permissions for a user who has been added to the system using
the SYSTEM ADD LOGIN command. Only a Super user can use this command.
Options
The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
--> system set login ckearns maydialin enabled
See also
SYSTEM SET LOGIN ACCESS
SYSTEM SET LOGIN MAYCONFIGURE
Option
Description
Default Value
N
AME
The name of an existing user.
N/A
ENABLED/
DISABLED
Determines whether or not a user can configure the sys-
tem via the Engineer or Customer web pages.
enabled
Option
Description
Default Value
N
AME
The name of an existing user.
N/A
ENABLED/
DISABLED
Determines whether a user can dial in to the system.
disabled

Rate

4 / 5 based on 3 votes.

Popular Allied-Telesis Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top